72-1015 TENMA, 72-1015 Datasheet - Page 51
![MULTIMETER, DIGITAL, BENCH, 3-3/4 DIGIT](/photos/27/66/276647/4720264_sml.jpg)
72-1015
Manufacturer Part Number
72-1015
Description
MULTIMETER, DIGITAL, BENCH, 3-3/4 DIGIT
Manufacturer
TENMA
Datasheet
1.72-1015.pdf
(56 pages)
Specifications of 72-1015
Dmm Type
Bench
Voltage Measuring Range Dc
600mV To 1000V
Voltage Measuring Range Ac
600mV To 1000V
Current Measuring Range Dc
60µA To 10A
Current Measuring Range Ac
60µA To 10A
Lead Free Status / RoHS Status
na
Model 72-1015: OPERATING MANUAL
B. Replacing the Fuses (see figure 12)
To avoid electrical shock or arc blast, or personal
injury or damage to the Meter, use specified fuses
ONLY in accordance with the following procedure.
To replace the Meter’s fuse:
1. Press the POWER to turn the Meter off, disconnect
2. Fuse 1: Remove the screws from the power socket
the power cord and remove all connections from the
terminals.
at the rear of the Meter. Remove the fuse by gently
prying
its bracket. Then install the replacement fuse.
Fuse 2 and 3: Use a coin to open the accessories
compartment at the top of the front cover, then you
will see a fuse compartment. Open the fuse
compartment to replace fuse 2 and 3. Remove the
fuse by gently prying one end loose, then take out
the fuse from its bracket.
Then install the replacement fuse.
Warning
one end loose, then take out the fuse from
(Figure 12)
49