FLUKE-772 Fluke, FLUKE-772 Datasheet - Page 10

• Manufacturer Part Number: FLUKE-772
• Description: MULTIMETER, DIGITAL, CLAMP
• Manufacturer: Fluke

Specifications of FLUKE-772

• Dmm Type: Clamp
• Voltage Measuring Range Dc: 0 To 30.00 V Dc
• Current Measuring Range Dc: 0mA To 100mA
• Current Measuring Range Ac: 0mA To 100mA
• Dmm Functions: AC/DC Current
• Current Ac Max: 100mA
• Ranging: Auto
• Altitude: 0 to 2000 m
• Dimensions: 1.63" × 3.0" × 9.75"
• Humidity: <90% @ <30°C, <75% @ 30 to 55°C
• Ip Rating: IP 40
• Shock Resistance: 1 m Drop Test (except jaw)
• Temperature, Operating: -10 to 50 °C
• Vibration: Random 2 g, 5 to 500 Hz
• Lead Free Status / RoHS Status: na
• Lead Free Status / RoHS Status: na

To use the test leads for measurements:
1.
2.
3.
4.
Current and Voltage Output Functions
Both Meters provide steady, stepped, and ramped current output for
testing 0-24 mA current loops. Additionally, the 773 provides voltage
output to 10 V. To access these functions, press
Sourcing mA
Use mA Source mode whenever it is necessary to source current into a
passive circuit such as a current loop with no loop supply. Source mode
depletes the battery faster than Simulate mode.
To enter Source mode for the 772, see Figure 4:
1.
2.
3.
Insert the test leads into the proper input jacks. See Figure 7.
Press the correct button for the measurement.
Apply the test leads.
Observe the reading on the main display. In mA mode, the
secondary display shows the reading in percentage of span.
Choose Source mode to supply current or voltage.
Choose Simulate mode to regulate current in an externally powered
current loop.
Choose Loop Supply mode to power an external device and
measure mA loop current.
Insert the test leads into the -mA and +mA jacks.
Press L.
Press
Figure 7. Taking Measurements with the Test Leads
T
until Source appears on the display.
LOOP PWR
mA SCALE
mA IN/OUT
HART
T
as necessary.
fjv09.eps