FLUKE-772 Fluke, FLUKE-772 Datasheet - Page 4

• Manufacturer Part Number: FLUKE-772
• Description: MULTIMETER, DIGITAL, CLAMP
• Manufacturer: Fluke

Specifications of FLUKE-772

• Dmm Type: Clamp
• Voltage Measuring Range Dc: 0 To 30.00 V Dc
• Current Measuring Range Dc: 0mA To 100mA
• Current Measuring Range Ac: 0mA To 100mA
• Dmm Functions: AC/DC Current
• Current Ac Max: 100mA
• Ranging: Auto
• Altitude: 0 to 2000 m
• Dimensions: 1.63" × 3.0" × 9.75"
• Humidity: <90% @ <30°C, <75% @ 30 to 55°C
• Ip Rating: IP 40
• Shock Resistance: 1 m Drop Test (except jaw)
• Temperature, Operating: -10 to 50 °C
• Vibration: Random 2 g, 5 to 500 Hz
• Lead Free Status / RoHS Status: na
• Lead Free Status / RoHS Status: na

Getting Acquainted with the Meter
Figures 1-4 explain the Meter’s features, buttons, input/output jacks, and
display.
Number
A
B
C
D
E
F
G
H
I
J
K
11
10
9
1
Turns the Meter on and off
Measurement spotlight LED button
Turns the display backlight on and off
Switches the Meter to Clamp Measure mode. Zeros the clamp
reading in Clamp mode. The Clamp modes includes clamp
measure, mA scale output, and mA IN/OUT.
Press N first to change to mA scale (773).
Cycles through source output ramping and 25 % stepping:
() Slow repeating 0 % - 100 % - 0 % ramp
() Fast repeating 0 % - 100 % - 0 % ramp
() Repeating 0 % - 100 % - 0 % ramp in 25 % steps
Press N first to activate mA IN/OUT (773).
Captures and holds the current reading. Pressing N first
activates the 250
N activates features listed above some buttons
0 %-100 %- sets voltage or mA sourcing output. Press N first to
activate U, V, X, and W to adjust the source output. Long press
G or D to set span range point.
Measure, Source, Simulate button
DC Volts selection (773)
mA selection. Press N first to activate Loop Power function.
LOOP PWR
Figure 1. Buttons
HART resistor.
Description
8
mA IN/OUT
mA SCALE
HART
2
7
3
6
4
Fjv06.eps
5