TDA8754HL11BE-S NXP Semiconductors, TDA8754HL11BE-S Datasheet - Page 34

• Manufacturer Part Number: TDA8754HL11BE-S
• Description: Video ICs TRPL 8BIT VIDEO ADC
• Manufacturer: NXP Semiconductors

Specifications of TDA8754HL11BE-S

• Operating Supply Voltage: 3 V to 3.6 V
• Supply Current: 180 mA
• Maximum Operating Temperature: + 70 C
• Package / Case: SOT-486
• Available Set Gain: 6 dB
• Bandwidth: 700 MHz
• Conversion Rate: 110 msps
• Maximum Power Dissipation: 1.3 W
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Number Of Channels: 3
• Resolution: 8 bit
• Snr: 48 dB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: TDA8754HL/11/C1,55

Philips Semiconductors
Table 50:
Table 51:
Table 52:
9397 750 14984
Product data sheet
Bit
1
0
Bit
7
6
5 to 4
3
2
1
0
Bit
Symbol
Reset
Access
INVERTER - inverter register (address 16h) bit description
OUTPUT - output register (address 17h) bit allocation
OUTPUT- output register (address 17h) bit description
Symbol
VSOINVRGB
FIELDOINV
Symbol
RGBSEL
TEN
AGCSEL[1:0]
BLKEN
DMXRGB
ODDARGB
SHIFTRGB
RGBSEL
9.16 Output register
W
7
0
TEN
Description
enables the output VSYNCO to be inverted
enables the output FIELDO to be inverted
Description
defines which RGB input will be used
enables the track and hold operating mode to be selected
define the output on pin AGCO
inhibits the blanking mode during clamp
determines whether all pixels go to port A or if pixels go alternately to port A and B. The
maximum data rate for single port mode is 140 MHz and it is 270 MHz in dual port mode.
defines the parity of the pixels
defines output on port A and B
W
6
0
0 = non-inverted
1 = inverted
0 = non-inverted
1 = inverted
0 = input 1
1 = input 2
0 = mode enable; must be set to logic 0 for proper operation
1 = mode disable
00 = RAGC
01 = GAGC
10 = BAGC
11 = not used
0 = blanking active; during the blanking period, the RGB outputs of the ADC are fixed at
the values of registers OFFSETR, OFFSETG and OFFSETB if these values are greater
or equal to 0, or forced to 0 if these values are negative.
1 = blanking not active
0 = port A
1 = port A and B
0 = even pixel on port A
1 = odd pixel on port A
0 = synchronous
1 = interleaved
AGCSEL1
W
5
0
Rev. 06 — 16 June 2005
AGCSEL0
W
4
0
BLKEN
…continued
W
3
0
Triple 8-bit video ADC up to 270 Msps
DMXRGB
W
2
0
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
ODDARGB
W
1
0
TDA8754
SHIFTRGB
W
0
0
34 of 57