HSDL-3201-008 Lite-On Electronics, HSDL-3201-008 Datasheet - Page 13

• Manufacturer Part Number: HSDL-3201-008
• Description: IRDA TX/RX 0.1152Mbps 3.3V 8-Pin Ultra Small Profile T/R
• Manufacturer: Lite-On Electronics
• Type: TX/RXr

Specifications of HSDL-3201-008

• Package: 8Ultra Small Profile
• Maximum Communication Distance: 30 cm
• Half Intensity Angle Degrees: 60(Max)/30(Min) °
• Maximum Data Rate: 0.1152 Mbps
• Peak Wavelength: 875/880 nm
• Pulse Width: 1.6/2.45 us
• Radiant Intensity: 9 mW/sr
• Operating Supply Voltage: 2.7 to 3.6 V

Adjacent Land Keep-Out and
Solder Mask Areas
Adjacent land keep-out is the
maximum space occupied by the unit
relative to the land pattern. There
should be no other SMD components
within this area.
The minimum solder resist strip width
required to avoid solder bridging
adjacent pads is 0.2 mm.
It is recommended that two fiducial
crosses be place at mid-length of the
pads for unit alignment.
Note: Wet/Liquid Photo-Imageable
solder resist/mask is recommended.
13
SOLDER MASK
0.2
8.2
UNITS: mm
2.6
3.0