MAX2163ETI/V+T Maxim Integrated Products, MAX2163ETI/V+T Datasheet - Page 9

• Manufacturer Part Number: MAX2163ETI/V+T
• Description: RF Receiver Low power TV tuner f or 1 segment ISDB-T
• Manufacturer: Maxim Integrated Products

Specifications of MAX2163ETI/V+T

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PIN
19
20
21
22
23
24
25
26
27
28
—
XTALOUT
GNDSYN
V
V
V
CPOUT
VTUNE
NAME
XTAL
CCVCO
CCSYN
CCDIG
MUX
LDO
EP
_______________________________________________________________________________________
DC Power Supply for Digital Logic Circuits. Connect to a +2.5V low-noise supply. Bypass to GND with a
0.1µF capacitor placed as close as possible to the pin. Do not share capacitor ground vias with other
ground connections.
Device TEST. See Table 14 for details.
Base Contact of Internal Colpitts Oscillator. See the Typical Application Circuit for details.
Crystal Oscillator Buffer Output. A DC-blocking capacitor must be used when driving external circuitry.
DC Power Supply for Synthesizer Circuits. Connect to a +2.5V low-noise supply. Bypass to GND with a
0.1µF capacitor placed as close as possible to the pin. Do not share capacitor ground vias with other
ground connections.
Charge-Pump Output. Connect this output to the PLL loop filter input with the shortest connection
possible.
Synthesizer Ground. Connect to the PCB ground plane. Do not share ground vias with other ground
connections.
High-Impedance VCO Tune Input. Connect the PLL loop filter output directly to this pin with as short as
possible of a connection.
Internal LDO Bypass. Bypass to GND with a 470nF capacitor placed as close as possible to the pin. Do
not share capacitor ground vias with other ground connections.
DC Power Supply for VCO Circuits. Connect to a +2.5V low-noise supply. Bypass to GND with a 0.1µF
capacitor placed as close as possible to the pin. Do not share capacitor ground vias with other ground
connections.
Exposed Paddle. Solder evenly to the board’s ground plane for proper RF performance and enhanced
thermal dissipation. Not intended as an electrical connection point.
ISDB-T 1-Segment Tuner
DESCRIPTION
Pin Description (continued)
9