XC6SLX45T-3FGG484C Xilinx Inc, XC6SLX45T-3FGG484C Datasheet - Page 18

• Manufacturer Part Number: XC6SLX45T-3FGG484C
• Description: FPGA Spartan®-6 Family 43661 Cells 45nm (CMOS) Technology 1.2V 484-Pin FBGA
• Manufacturer: Xilinx Inc
• Series: Spartan® 6 LXTr

Specifications of XC6SLX45T-3FGG484C

• Package: 484FBGA
• Family Name: Spartan®-6
• Device Logic Cells: 43661
• Device Logic Units: 27288
• Number Of Registers: 54576
• Typical Operating Supply Voltage: 1.2 V
• Maximum Number Of User I/os: 296
• Ram Bits: 2138112
• Package / Case: 484-BGA
• Mounting Type: Surface Mount
• Voltage - Supply: 1 V ~ 3.6 V
• Operating Temperature: 0°C ~ 85°C
• Number Of I /o: 296
• Number Of Logic Elements/cells: 43661
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Gates: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Switching Characteristics
All values represented in this data sheet are based on these
speed specifications: v1.17 for -3, -3N, and -2; and v1.06 for
-1L. Switching characteristics are specified on a per-speed-
grade basis and can be designated as Advance,
Preliminary, or Production. Each designation is defined as
follows:
Advance
These specifications are based on simulations only and are
typically available soon after device design specifications
are frozen. Although speed grades with this designation are
considered relatively stable and conservative, some under-
reporting might still occur.
Preliminary
These specifications are based on complete ES
(engineering sample) silicon characterization. Devices and
speed grades with this designation are intended to give a
better indication of the expected performance of production
silicon. The probability of under-reporting delays is greatly
reduced as compared to Advance data.
Production
These specifications are released once enough production
silicon of a particular device family member has been
characterized to provide full correlation between
specifications and devices over numerous production lots.
There is no under-reporting of delays, and customers
receive formal notification of any subsequent changes.
Typically, the slowest speed grades transition to Production
before faster speed grades.
All specifications are always representative of worst-case
supply voltage and junction temperature conditions.
Testing of Switching Characteristics
All devices are 100% functionally tested. Internal timing parameters are derived from measuring internal test patterns. Listed
below are representative values.
For more specific, more precise, and worst-case guaranteed data, use the values reported by the static timing analyzer and
back-annotate to the simulation net list. Unless otherwise noted, values apply to all Spartan-6 devices.
DS162 (v2.0) March 31, 2011
Preliminary Product Specification
www.xilinx.com
Spartan-6 FPGA Data Sheet: DC and Switching Characteristics
Since individual family members are produced at different
times, the migration from one category to another depends
completely on the status of the fabrication process for each
device.
The -1L speed grade refers to the lower-power Spartan-6
devices. The -3N speed grade refers to the Spartan-6
devices that do not support MCB functionality.
Table 26
device on a per speed grade basis.
Table 26: Spartan-6 Device Speed Grade Designations
Notes:
1.
XC6SLX4
XC6SLX9
XC6SLX16
XC6SLX25
XC6SLX25T
XC6SLX45
XC6SLX45T
XC6SLX75
XC6SLX75T
XC6SLX100
XC6SLX100T
XC6SLX150
XC6SLX150T
Device
The XC6SLX4 is not available in the -3N speed grade.
correlates the current status of each Spartan-6
(1)
Advance
Speed Grade Designations
Preliminary
-1L
-1L
-1L
-1L
-1L
-1L
-1L
-3, -3N, -2, -1L
Production
-3, -3N, -2
-3, -3N, -2
-3, -3N, -2
-3, -3N, -2
-3, -3N, -2
-3, -3N, -2
-3, -3N, -2
-3, -3N, -2
-3, -3N, -2
-3, -3N, -2
-3, -3N, -2
-3, -2
18