BLKDQ57TM Intel (CPU), BLKDQ57TM Datasheet - Page 33

• Manufacturer Part Number: BLKDQ57TM
• Manufacturer: Intel (CPU)

Specifications of BLKDQ57TM

• Lead Free Status / RoHS Status: Supplier Unconfirmed

2 Installing and Replacing Desktop
Before You Begin
Board Components
This chapter tells you how to:
•
•
•
•
•
•
•
•
•
•
•
•
•
CAUTIONS
The procedures in this chapter assume familiarity with the general terminology
associated with personal computers and with the safety practices and regulatory
compliance required for using and modifying electronic equipment.
Disconnect the computer from its power source and from any telecommunications
links, networks, or modems before performing any of the procedures described in this
chapter. Failure to disconnect power, telecommunications links, networks, or modems
before you open the computer or perform any procedures can result in personal injury
or equipment damage. Some circuitry on the board can continue to operate even
though the front panel power button is off.
Follow these guidelines before you begin:
•
•
•
Install the I/O shield
Install and remove the Desktop Board
Install and remove a processor
Install and remove memory
Install and remove a PCI Express x16 card
Connect Serial ATA cables
Connect to the internal headers
Connect to the audio system
Connect chassis fan and power supply cables
Set the BIOS configuration jumper
Clear passwords
Clear CMOS Memory
Replace the battery
Always follow the steps in each procedure in the correct order.
Set up a log to record information about your computer, such as model, serial
numbers, installed options, and configuration information.
Electrostatic discharge (ESD) can damage components. Perform the procedures
described in this chapter only at an ESD workstation using an antistatic wrist strap
and a conductive foam pad. If such a station is not available, you can provide
some ESD protection by wearing an antistatic wrist strap and attaching it to a
metal part of the computer chassis.
33