2-1419130-4 TE Connectivity, 2-1419130-4 Datasheet - Page 347

• Manufacturer Part Number: 2-1419130-4
• Description: Electromechanical Relay SPDT 1A 12VDC 960Ohm Through Hole
• Manufacturer: TE Connectivity
• Type: Miniature Sealed Relayr

Specifications of 2-1419130-4

• Contact Arrangement: SPDT
• Dc Coil Voltage: 12 V
• Coil Current: 12.5 mA
• Mounting: Through Hole
• Relay Construction: Non-Latching
• Coil Voltage Dc: 12V
• Contact Form: 1 Form C
• Coil Resistance: 960Ohm
• Contact Current Rating: 1A
• Contact Material: Silver Nickel/Gold Plated
• Coil Suppression Diode: No
• Push To Test Button: No
• Led Indicator: No
• Seal: Sealed
• Product Height (mm): 10mm
• Product Depth (mm): 7.5mm
• Product Length (mm): 12.5mm
• Mounting Style: Through Hole
• Termination Style: PC Pin
• Lead Free Status / Rohs Status: Compliant

Ordering Information
TR
10 Amp Control Relay – Timing Version
TR Features
• 8 timing ranges.
• 4 SPDT contacts.
• Magnetic blowout device option increases DC current carrying ability
Timing Specifications
Operating Mode: On-Delay (Delay on energization).
Timing Adjustment: Internal fized or internal potentiometer.
Timing Ranges:
Accuracy:
Reset Time: 75ms.
Contact Data @ 25°C
Arrangements: 4 Form C (4PDT)
Nominal Rating: 10A @ 120VAC.
Contact Pressure:
Expected Life: Mechanical: 100 million operations.
Initial Dielectric Strength
Between terminals and case and between mutually-isolated
contacts: 2,000VAC.
Our authorized distributors are more likely to maintain the following items in stock for immediate delivery..
None at present.
TR Design/Construction
Couples an advanced electromechanical design with a field-proven solid-
state timing network, an adaptation of the circuit used in the AGASTAT
premium grade SSC Timer.
temperature-compensation components, affording unusual stability over a
realistically broad operating temperature range. It also provides transient
protection and protection against premature switching of the output
contacts due to power interruption during timing.
Dimensions are shown for
reference purposes only.
approximately ten times for both N.O. and N.C. contacts. In both AC and
DC operation, the addition of the device will normally double the contact
life, due to reduced arcing.
Repeat: ±2% as fixed temerature and voltage.
Overall: ±5% over combined rated extremes of temerature and voltage.
Between movable and normally closed contacts: 30 g, typical.
Between movable and normally open contacts: 100 g, typical.
1. Basic Series:
2. Operation:
3. Output:
4. Operating Voltage:
5. Timing Adjustment:
6. Timing Range:
7. Options:
This unique circuit also eliminates the need for supplementary
TR = Timing control relay
1 = On-delay
4 = 4PDT (4 form C)
B = 24VDC
1 = Internal fixed.
A = .15 to 3 sec.
B = .55 to 15 sec.
N = Magnetic blow-out device.
series
Typical Part No.
Electrical: See load/life graph.
.15 to 3 sec.
.55 to 15 sec.
1 to 30 sec.
2 to 60 sec.
D = 215VDC
C = 1 to 30 sec.
D = 2 to 60 sec.
➤
3 = Internal potentiometer.
TR
4 to 120 sec.
10 to 300 sec.
1 to 30 min.
2 to 60 min.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
I = 120VAC, 50/60 Hz.
E = 4 to 120 sec.
G = 10 to 300 sec.
1
4
B
Catalog 1308242
I = 2 to 60 min.
N = 1 to 30 min.
Issued 3-03
1
Initial Insulation Resistance
Between non-connected terminals: 10 9 ohms at 500VDC.
Between non-connected terminals & relay yoke: 10 9 ohms at 500VDC.
Transient Protection
1,500 volt transient of less than 100 microseconds, or 1,000 volts or less.
Load Life Curve
Coil Data
Voltage: 120VAC, 50-60 Hz.; 24 & 125VDC.
Specifications and availability
subject to change.
Environmenal Data
Operating Temperature Range: 0°C to +50°C.
Mechanical Data
Mounting Terminals: 16 flat base pins. Screw terminal sockets are
available.
Weight: 11 oz. (311g) approximately.
A
N
Wiring Diagram (Bottom View)
Outline Dimensions
Same as GP/MR. See previous page.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
AGASTAT
919