2-1419130-4 TE Connectivity, 2-1419130-4 Datasheet - Page 362

• Manufacturer Part Number: 2-1419130-4
• Description: Electromechanical Relay SPDT 1A 12VDC 960Ohm Through Hole
• Manufacturer: TE Connectivity
• Type: Miniature Sealed Relayr

Specifications of 2-1419130-4

• Contact Arrangement: SPDT
• Dc Coil Voltage: 12 V
• Coil Current: 12.5 mA
• Mounting: Through Hole
• Relay Construction: Non-Latching
• Coil Voltage Dc: 12V
• Contact Form: 1 Form C
• Coil Resistance: 960Ohm
• Contact Current Rating: 1A
• Contact Material: Silver Nickel/Gold Plated
• Coil Suppression Diode: No
• Push To Test Button: No
• Led Indicator: No
• Seal: Sealed
• Product Height (mm): 10mm
• Product Depth (mm): 7.5mm
• Product Length (mm): 12.5mm
• Mounting Style: Through Hole
• Termination Style: PC Pin
• Lead Free Status / Rohs Status: Compliant

1014
Max. Switching Power: 35-250 watts DC (voltage dependent
Min. Recommended Current: 1.0 amp @ 12VDC.
Initial Voltage Drop: 200 millivolts, maximum, for normally open contacts
Expected Life: 10 million operations, mechanical; 100,000 operations at 20
Conditions
All parametric, environmental and life tests are performed according to EIA
Standard RS-407-A at standard test conditions (23°C Ambient, 20-50% RH,
29.5 ± 1.0" Hg.) unless otherwise noted.
Contact Data
Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT).
Material: AgNi 0.15 and AgSnO (consult factory for other contact materials).
Max. Switching Rate: 20 operations per second with no contact load.
Max. Switching Voltage: 75VDC
Max. Load Current (@ 14VDC Load Voltage):
Initial Dielectric Strength
Between Contacts and Coil: 500V rms.
Features
• 20A continuous contact rating @ 85°C.
• 1 Form A and 1 Form C arrangements.
• Plug-in terminals.
• Plastic enclosure.
Coil Data
Voltage: 12VDC.
Resistance: See Coil Data table.
Nom. Power: (@ 23°C coil temp. and rated coil voltage.):
Thermal Resistance: 50°C per actual coil watt in still air with no contact
Coil Data (@ 23°C Coil Temperature)
Dimensions are shown for
reference purposes only.
Max. Continuous Current
Max. Break Current
Max. Make Current
Designator
(VDC)
Coil
F
Load
1.6W, unsuppressed.
1.81W, with 680 ohm resistor.
amps, 14VDC, resistive load on normally open contact.
@ 15 amp contact load.
250 millivolts, maximum, for normally closed contacts
@ 10 amp contact load.
(1)
load current.
6 operations per minute for rated life at rated load.
Rated Coil
Voltage
(VDC)
12
Form A
120A
(1)
(NO)
20A
30A
.
(2)
±10% (Ohms)
Resistance
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Coil
120A
90
20A
30A
NO
(2)
Form C
(1)
.
Inductance
(H) (Ref.)
10A
40A
15A
NC
Coil
0.5
Catalog 1308242
Issued 3-03
Operate Data
Must Operate and Must Release Voltage: See Coil Data table.
Initial Release Time: 1.5 milliseconds, typical, with zero volts applied (for
Environmental Data
Temperature Range: Storage: -40°C to +155°C.
Shock: 10g, 11 milliseconds, half sine wave pulse.
Vibration: (For NC contacts, NO contacts are significantly higher.)
Mechanical Data
Termination: Quick connect.
Enclosure: Plastic dust cover.
Weight: With QC terminals: 20g (0.7 oz.) approximately.
Abnormal Operation
Overload Current: 40A, 36 sec.
24V Jump Start: 24VDC for 5 minutes conducting rated contact current
Drop Test: Capable of meeting specifications after a 3.28 foot (1.0 meter)
Flammability: UL94-HB or better (meets FMVSS 302).
Notes
(1) See Figure 1.
(2) Inrush current for lamp load.
(3) Allowable overdrive is rated at ambient temperature for 23°C or 85°C
(4) See Figure 2.
(5) Current and times are compatible with circuit protection by a typical
Initial Operate Time: 4 milliseconds, typical, with rated coil voltage
Specifications and availability
subject to change.
VFM
20 Amp Relay
With Quick Connect Terminals
for Automotive Applications
Must-Operate
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that users also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
20A automotive circuit breaker. Relay will make, carry and break the
specified current.
Voltage
as stated with no load current flowing through the relay contacts and
minimum coil resistance. Also see Figure 2 for maximum ambient
temperature versus applied coil voltage.
(VDC)
7 .2
10-40 Hz., 1.27mm double amplitude.
40-70 Hz., 5g's constant.
70-100 Hz., 0.5mm double amplitude.
100-500 Hz., 10g's constant.
drop onto concrete in final enclosure.
series
@ 23°C.
80A, 10 sec.
200A, 2.5 sec.
unsuppressed relays after having been energized at
rated coil voltage).
Operating: -40°C to + 125°
applied.
Must-Release
Voltage
(VDC)
1.2
(5)
@ 23°C
TYCO ELECTRONICS
20.4
(4)
Allowable
.
Overdrive
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
(3)
@ 85°C
14.9