8-1393792-5 TE Connectivity, 8-1393792-5 Datasheet - Page 117

• Manufacturer Part Number: 8-1393792-5
• Description: Electromechanical Relay DPDT 3A 5VDC 168Ohm Through Hole
• Manufacturer: TE Connectivity
• Type: Signal Relayr

Specifications of 8-1393792-5

• Contact Arrangement: DPDT
• Dc Coil Voltage: 5 V
• Coil Current: 29.76 mA
• Mounting: Through Hole
• Relay Construction: Non-Latching
• Coil Voltage Dc: 5V
• Contact Form: 2 Form C
• Voltage Rating (vdc): 220V
• Voltage Rating (vac): 250V
• Dropout Volt (min): 0.25VDCV
• Coil Resistance: 168Ohm
• Pick-up Voltage (max): 4VDC
• Maximum Power Rating: 60W/125VA
• Operate Time: 5ms
• Contact Current Rating: 3A
• Contact Material: AgNi/Au
• Coil Suppression Diode: No
• Push To Test Button: No
• Led Indicator: No
• Seal: Unsealed
• Product Height (mm): 11mm
• Product Depth (mm): 10mm
• Product Length (mm): 20.2mm
• Operating Temp Range: -25C to 85C
• Pin Count: 8
• Mounting Style: Through Hole
• Termination Style: PC Pin
• Package / Case: DIP
• Lead Free Status / Rohs Status: Compliant

Dimensions are shown for
reference purposes only.
Insulation Data
Insulation to IEC 664/VDE 0110
Tracking Resistance of Relay Base: PTI 600.
Contact Data @ 20°C
Arrangements: 1 Form A.
Type: Bifurcated.
Material: AgNi
Max. Switching Rate: 12,000 ops./min. (no load).
Expected Mechanical Life: 20 million operations (no load).
Expected Electrical Life: 100,000 operations (rated load).
Minimum Load: 1mA @ 5VDC.
Contact Ratings
Ratings: 3A @ 250VAC resistive.
Max. Switched Voltage: AC: 277V; DC: 125V.
Rated Switched Voltage: AC: 250V.
Max. Switched Current: 3A.
Max. Switched Power: AC: 1250VA; DC: 150W.
Initial Contact Resistance: 50 milliohms @ 100mA, 6VDC (reference).
NOTE: A 5A rated version ot the PCN series is now in development. Consult
Initial Dielectric Strength
Between Open Contacts: 750Vrms.
Between Coil and Contacts: 3,000Vrms.
Surge Voltage Between Coil and Contacts: 5,080V (1.2 / 50µs).
Features
• Only 5 mm wide, permitting high density spacing.
• 1 Form A contact arrangement.
• Sensitive coil requires only 120mW coil power.
• Well suited for HVAC controls, I/O panels, PLCs.
Voltage Rating: 277VAC.
Pollution Degree: 2.
Overvoltage Category: II.
factory regarding its availability.
3A @ 30VDC resistive.
100 ops./min. (rated load).
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Catalog 1308242
Issued 3-03
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that user also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
PCN
Slim, 3 Amp
PC Board Relay
Operating Humidity: 10 to 90% RH. (Non-condensing).
Mechanical Data
Termination: Printed circuit terminals.
Enclosure (94V-0 Flammability Ratings): Sealed (RT III / wash-tight) plastic
case.
Weight: 0.1 oz (3g) approximately.
Coil Data
Voltage: 5 to 24VDC.
Nominal Power: 120mW.
Operate Power: 58.8mW.
Coil Temperature Rise: 35°C max., at rated coil voltage.
Max. Coil Voltage: 130% of nominal.
Duty Cycle: Continuous.
Operate Data
Must Operate Voltage: 70% of nominal voltage or less.
Must Release Voltage: 10% of nominal voltage or more.
Operate Time: 5 ms typ.
Release Time: 2 ms typ.
Bounce Time: <1 ms typ.
Environmental Data
Temperature Range:
Vibration, Mechanical: 10 to 55Hz., 1.5mm double amplitude.
Shock, Mechanical: 1,000m/s
Rated Coil
Coil Data @ 20°C
Voltage
Operating: -40°C to +70°C
(VDC)
12
24
5
6
9
File No. E82292
Operational: 100m/s
Specifications and availability
subject to change.
Operational: 10 to 55Hz., 1.5mm double amplitude.
series
Nominal
Current
(mA)
24.0
20.0
13.3
10.0
5.0
(ohms) ± 10%
Resistance
2
(10G approximately).
1,200
4,800
2
Coil
(100G approximately).
208
300
675
PCN
Must Operate
Voltage
16.8
(VDC)
3.5
4.2
6.3
8.4
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
Must Release
Voltage
(VDC)
0.5
0.6
0.9
1.2
2.4
OEG
407