8-1393792-5 TE Connectivity, 8-1393792-5 Datasheet - Page 314

• Manufacturer Part Number: 8-1393792-5
• Description: Electromechanical Relay DPDT 3A 5VDC 168Ohm Through Hole
• Manufacturer: TE Connectivity
• Type: Signal Relayr

Specifications of 8-1393792-5

• Contact Arrangement: DPDT
• Dc Coil Voltage: 5 V
• Coil Current: 29.76 mA
• Mounting: Through Hole
• Relay Construction: Non-Latching
• Coil Voltage Dc: 5V
• Contact Form: 2 Form C
• Voltage Rating (vdc): 220V
• Voltage Rating (vac): 250V
• Dropout Volt (min): 0.25VDCV
• Coil Resistance: 168Ohm
• Pick-up Voltage (max): 4VDC
• Maximum Power Rating: 60W/125VA
• Operate Time: 5ms
• Contact Current Rating: 3A
• Contact Material: AgNi/Au
• Coil Suppression Diode: No
• Push To Test Button: No
• Led Indicator: No
• Seal: Unsealed
• Product Height (mm): 11mm
• Product Depth (mm): 10mm
• Product Length (mm): 20.2mm
• Operating Temp Range: -25C to 85C
• Pin Count: 8
• Mounting Style: Through Hole
• Termination Style: PC Pin
• Package / Case: DIP
• Lead Free Status / Rohs Status: Compliant

828
Contact Data @ 25°C
Material: Silver Cadmium Oxide.
Expected Life (application dependent): 200,000 ops., at rated load.
Features
• Next-generation contactor is smaller and lighter than previous models.
• Enclosed case affords contact and coil protection while working in
• Snap-together assembly and reduced part count help to hold down cost.
• Design permits direct access to holes in mounting base.
Arrangements: 1 Form X (SPST-NO-DM) with or without shunt and
Maximum Ratings: See Contact Ratings Table.
Minimum Ratings: 96VA.
Initial Dielectric Strength
Initial Breakdown Voltage:
Contact Ratings
Dimensions are shown for
reference purposes only.
25 Amp Contactor
30 Amp Contactor
conjunction with plastic mounting base to reduce operational noise level
and electrically isolate unit.
Model
2 Form X (DPST-NO-DM).
Between Contacts and Coil: 1,600 VAC
Between Poles: 1,600 VAC
Between Open Contacts: 1,600 VAC
Maximum
Voltage
VAC
277
277
Amps
Load
Full
25
30
500,000 ops., mechanical.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Locked
Amps
Rotor
150
150
Resistive
Amps
Load
30
40
Catalog 1308242
Issued 3-03
Coil Data @ 25°C
Nominal Inrush Power: 25 VA (60 Hz.); 30 VA (50 Hz.).
Insulation Class: UL Class B (130°C).
Duty Cycle: Continuous.
Specifications and availability
subject to change.
Model 2000
Definite Purpose Contactor
1- or 2-pole, 25-30 FLA
AC Coil
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that users also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
Voltage: 24, 100, 120, 200, 208-240 and 277 VAC, 50/60 Hz.
Nominal Power: 6 VA (60 Hz.); 8 VA (50 Hz.).
Coil Temperature Rise: 65°C Max.
Operate Data @ 25°C
Environmental Data
Temperature Range: Storage and Operating: -40°C – +65°C.
Flammability: UL 94-HB housing.
Mechanical Data
Contact Termination:
Coil Termination: Dual 0.250” (6.35 mm) quick connects.
Weight: 4.93 oz. (140 g) approximately
Must Operate Voltage: 85% of nominal coil voltage or less.
Must Release Voltage: 10% of nominal coil voltage or more.
Initial Operate Time: 20 ms, typical.
Initial Release Time: 10 ms, typical.
Max. Bounce Time: 0-10 ms, typical.
Type: #10-32 Screw with quad 0.250” (6.35 mm) quick connects.
Wire Size: 16-8 AWG (Must use ring terminal for 8 AWG wire.)
Tightening Torque: 22 in.-lbs.
File E75492
series
PRODUCTS UNLIMITED
PRELIMINARY DATA
www.tycoelectronics.com
Technical support:
Refer to inside back cover.