103308-8 TE Connectivity, 103308-8 Datasheet - Page 3

• Manufacturer Part Number: 103308-8
• Description: Conn Shrouded Header HDR 40 POS 2.54mm Solder ST Thru-Hole
• Manufacturer: TE Connectivity
• Type: Shrouded Headerr

Specifications of 103308-8

• Pitch: 2.54 mm
• Number Of Rows: 2
• Number Of Contacts: 40
• Gender: HDR
• Contact Plating: Gold Over Nickel/Gold Over Palladium Nickel
• Termination Method: Solder
• Product Line: AMP-LATCH
• Profile: Low
• Pcb Mounting Orientation: Vertical
• Pcb Mount Retention: Without
• Mating Connector Lock: Without
• Housing Style: 4-Sided
• Ejection Latches: Without
• Post Size (mm [in]): 0.64 [.025]
• Shrouded: Yes
• [shrouded] End Dimension (mm [in]): 3.81 [0.150]
• Current Rating (a): 1
• Insulation Resistance (m?): 5,000
• Termination Post Length (mm [in]): 3.05 [0.120]
• Solder Tail Contact Plating: Tin-Lead over Nickel
• Header Type: Pin Header
• Number Of Positions: 40
• Centerline, Matrix (mm [in]): 2.54 x 2.54 [.100 x .100]
• Daisy Chain: With
• Preloaded: Yes
• Contact Plating, Mating Area, Material: Gold (15), Gold Flash over Palladium Nickel
• Contact Shape: Square
• Contact Base Material: Copper Alloy
• Connector Style: Header - Pin
• Mating Alignment Type: Center, Dual Polarizing Bar
• Mating Alignment: With
• Housing Material: Thermoplastic - GF
• Ul Flammability Rating: UL 94V-0
• Housing Color: Black
• Rohs/elv Compliance: ELV compliant, 5 of 6 Compliant
• Lead Free Solder Processes: Not suitable for lead free processing
• Approved Standards: UL E28476, CSA LR7189
• Operating Temperature (°c): -65 – +105
• Temperature Rating: Standard

Physical shock.
Connector m ating force.
Connector unm ating force.
Durability.
Therm al shock.
Hum idity/tem perature cycling.
Mixed flowing gas.
Rev D
Test Description
No discontinuity greater than 1
m icrosecond.
See Note (a).
12 ounces m axim um per contact.
1.5 ounces m inim um per contact.
Term ination resistance, dry circuit.
See Note (b).
Term ination resistance, dry circuit.
Insulation resistance.
Dielectric withstanding voltage.
See Note (c).
See Note (d).
Insulation resistance.
Dielectric withstanding voltage.
See Note (a).
Term ination resistance, dry circuit.
See Note (a).
Figure 1 (continued)
ENVIRONMENTAL
Requirem ent
TE Spec 109-42, Condition A.
TE Spec 109-42, Condition A.
TE Spec 109-26-9.
Subject rigid m ount wired and
m ated connectors to 100 Gs
sawtooth shock pulses of 6
m illiseconds duration. Three shocks
in each direction applied along 3
m utually perpendicular planes, 18
shocks total.
Measure force necessary to m ate
connector for first m ating. Calculate
m ating force per contact by dividing
m ating force by num ber of contacts.
Measure force necessary to unm ate
connector after first m ating.
Calculate unm ating force per
contact by dividing unm ating force
by num ber of contacts.
TE Spec 109-27.
Mate and unm ate 15 ìin gold plated
connectors or equivalent 3 ìin gold
over 12 ìin palladium nickel for 75
cycles. Mate and unm ate 30 ìin
gold plated connectors or equivalent
3 ìin gold over 27 ìin palladium
nickel for 150 cycles at m axim um
rate of 150 cycles per hour.
TE Spec 109-22.
Subject unwired and unm ated
connectors of Test Group 2 and
wired and m ated connectors of Test
Group 4 to 5 cycles between -65
and 105°C.
TE Spec 109-23, Condition B,
Method III less step 7(b).
Subject m ated and unterm inated
connectors to 10 days
hum idity/tem perature cycling at 25
to 65°C and 80 to 98% RH, 5 cold
shocks at -10°C.
TE Spec 109-85-3.
Subject m ated connectors to
environm ental class III for 20 days.
Procedure
108-40000
3 of 6