104130-5 TE Connectivity, 104130-5 Datasheet - Page 5

• Manufacturer Part Number: 104130-5
• Description: Conn Ejector Header HDR 26 POS 2.54mm Solder RA Thru-Hole
• Manufacturer: TE Connectivity
• Type: Ejector Headerr
• Series: AMP-LATCHr

Specifications of 104130-5

• Pitch: 2.54 mm
• Number Of Rows: 2
• Number Of Contacts: 26
• Gender: HDR
• Contact Plating: Gold Over Nickel
• Termination Method: Solder
• Connector Type: Wire To Board
• Contact Termination: Right Angle Through Hole
• No. Of Contacts: 26
• No. Of Rows: 2
• Pitch Spacing: 2.54mm
• Rohs Compliant: No
• Product Line: AMP-LATCH
• Profile: Low
• Pcb Mounting Orientation: Right Angle
• Pcb Mount Retention: Without
• Mating Connector Lock: Without
• Housing Style: 4-Sided
• Ejection Latches: With
• Post Size (mm [in]): 0.64 [.025]
• Shrouded: Yes
• [shrouded] End Dimension (mm [in]): 3.81 [0.150]
• Current Rating (a): 1
• Insulation Resistance (m?): 5,000
• Termination Post Length (mm [in]): 3.43 [0.135]
• Solder Tail Contact Plating: Tin-Lead over Nickel
• Header Type: Pin Header
• Number Of Positions: 26
• Centerline, Matrix (mm [in]): 2.54 x 2.54 [.100 x .100]
• Daisy Chain: With
• Preloaded: Yes
• Contact Plating, Mating Area, Material: Gold (30), Gold Flash over Palladium Nickel
• Contact Shape: Square
• Contact Base Material: Copper Alloy
• Connector Style: Header - Pin
• Mating Alignment Type: Center, Dual Polarizing Bar
• Mating Alignment: With
• Housing Material: Thermoplastic - GF
• Ul Flammability Rating: UL 94V-0
• Housing Color: Black
• Rohs/elv Compliance: Not ELV/RoHS compliant
• Lead Free Solder Processes: Not suitable for lead free processing
• Approved Standards: UL E28476, CSA LR7189
• Operating Temperature (°c): -65 – +105
• Temperature Rating: Standard

Product Facts
■
■
■
■
■
■
■
Technical Documents
Product Specifications
108-1956
Application Specifications
114-13021
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Press fit design —
eliminates hand soldering
Unitized PC/104 connector
assembly — eliminates two
piece (64 pin & 40 pin)
configuration
Integral board spacers with
captive hardware — eases
& improves assembly
efficiency while minimizing
stocked hardware
“Flat-rock” insertable — no
need for complex insertion
tooling
Recognized by Underwriters'
Laboratories to US
and Canadian
standards
file No. E28476
Fully compliant with PC104
& PC104- Plus standards
Solutions available for lead
free processes (ie. ENIG
and silver immersion plated
PCB's)
are metric equivalents.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
AMPMODU Interconnection System
PC/104 and PC/104- Plus Connectors
The PC/104 and PC/104- Plus
connectors are industry
standard product offerings
which comply with the
interconnection require-
ments defined by the
PC/104 organization
(http://www.pc104.org)
Both products are designed
specifically for “flat-rock”
press-fit installation for ease
of application. Solder ver-
sion is also available.
Optional integral standoffs
minimize the customer’s
system assembly time.
The Tyco Electronics offer-
ing of the standard PC/104
product is a unitized con-
nector rather than the two
piece, 40 and 64 position
connectors currently on the
market. Customer needs to
stock and apply only one
part number rather than
two.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
*Two circuits plugged per PC/104 specification.
**One circuit plugged per PC/104- Plus specifica-
Other options available.
tion. Other options available.
PC/104- Plus
Connector
PC/104
Performance Specifications
Electrical Characteristics
Meets requirements of PC/104 and
PC/104- Plus standards
Nominal Resistance —
10 milliohms maximum,
Insulation Resistance —
1000 megohms minimum
Dielectric Withstanding Voltage —
500 VAC for 1 min. at sea level
Mechanical Characteristics
Meets requirements of PC/104 and
PC/104- Plus standards
Current — Signal application only
Temperature — –55° to 105°C
Material and Finish
Housing — Black Thermoplastic, UL
94V-0
Contact — Phosphor Bronze, Full Gold
all over Nickel (stackthrough), Gold on
mating end, Tin or Tin-lead on PCB tail
all over Nickel (non-stackthrough)
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
Centerline
.100
2.54
.079
2.0
R
Position
120**
104*
Need more information?
Call Technical
Support 1-800-522-6752:
Technical Support is staffed
with specialists well versed
in all Tyco Electronics prod-
ucts. The Center can pro-
vide you with:
■
■
■
■
Technical Support
Catalogs
Technical Documents
Tyco Electronics
Authorized Distributor
Locations
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
5
1