SST39VF800A-70-4C-MAQE Microchip Technology, SST39VF800A-70-4C-MAQE Datasheet - Page 9

• Manufacturer Part Number: SST39VF800A-70-4C-MAQE
• Description: 2.7V To 3.6V 8Mbit Multi-Purpose Flash 48 WFBGA 4x6x0.8 Mm TRAY
• Manufacturer: Microchip Technology
• Series: -r

Specifications of SST39VF800A-70-4C-MAQE

• Format - Memory: FLASH
• Memory Type: FLASH
• Memory Size: 8M (512K x 16)
• Speed: 70ns
• Interface: Parallel
• Voltage - Supply: 2.7 V ~ 3.6 V
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 48-WFBGA
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

A Microchip Technology Company
© 2011 Silicon Storage Technology, Inc.
Hardware Data Protection
Software Data Protection (SDP)
Common Flash Memory Interface (CFI)
Product Identification
Noise/Glitch Protection: A WE# or CE# pulse of less than 5 ns will not initiate a write cycle.
V
Write Inhibit Mode: Forcing OE# low, CE# high, or WE# high will inhibit the Write operation. This pre-
vents inadvertent writes during power-up or power-down.
The SST39LF200A/400A/800A and SST39VF200A/400A/800A provide the JEDEC approved Soft-
ware Data Protection scheme for all data alteration operations, i.e., Program and Erase. Any Program
operation requires the inclusion of the three-byte sequence. The three-byte load sequence is used to
initiate the Program operation, providing optimal protection from inadvertent Write operations, e.g.,
during the system power-up or power-down. Any Erase operation requires the inclusion of six-byte
sequence. This group of devices are shipped with the Software Data Protection permanently enabled.
See Table 4 for the specific software command codes. During SDP command sequence, invalid com-
mands will abort the device to Read mode within TRC. The contents of DQ
but no other value, during any SDP command sequence.
The SST39LF200A/400A/800A and SST39VF200A/400A/800A also contain the CFI information to
describe the characteristics of the device. In order to enter the CFI Query mode, the system must write
three-byte sequence, same as Software ID Entry command with 98H (CFI Query command) to
address 5555H in the last byte sequence. Once the device enters the CFI Query mode, the system
can read CFI data at the addresses given in Tables 5 through 9. The system must write the CFI Exit
command to return to Read mode from the CFI Query mode.
The Product Identification mode identifies the devices as the SST39LF/VF200A, SST39LF/VF400A
and SST39LF/VF800A and manufacturer as SST. This mode may be accessed by software operations.
Users may use the Software Product Identification operation to identify the part (i.e., using the device
ID) when using multiple manufacturers in the same socket. For details, see Table 4 for software opera-
tion, Figure 13 for the Software ID Entry and Read timing diagram, and Figure 20 for the Software ID
Entry command sequence flowchart.
Table 2: Product Identification
Manufacturer’s ID
Device ID
DD
SST39LF/VF200A
SST39LF/VF400A
SST39LF/VF800A
Power Up/Down Detection: The Write operation is inhibited when V
2 Mbit / 4 Mbit / 8 Mbit Multi-Purpose Flash
SST39VF200A / SST39VF400A / SST39VF800A
SST39LF200A / SST39LF400A / SST39LF800A
Address
0000H
0001H
0001H
0001H
9
00BFH
2789H
2780H
2781H
Data
T2.3 25001
DD
is less than 1.5V.
15
-DQ
8
can be V
DS25001A
Data Sheet
IL
or V
03/11
IH
,