SLATA5GM1U STEC, SLATA5GM1U Datasheet

SLATA5GM1U

Manufacturer Part Number

SLATA5GM1U

Description

Manufacturer

STEC

Datasheet

1.SLATA5GM1U.pdf (32 pages)

Specifications of SLATA5GM1U

Lead Free Status / RoHS Status

Compliant

Current page: 1 of 32
Download datasheet (926Kb)

Solid-State Memory Card

(No Moving Parts)

Capacity: 128MB - 16GB

ATA-5 Compatible

ATA Transfer modes:

Supports TrueIDE and PC Card

Memory and I/O Modes

Form Factors:

Endurance Guarantee of 2,000,000

Write/Erase Cycles

Card Information Structure (CIS)

Programmed into 256 Bytes of

Internal Memory

PC Card and Socket Services

Release 2.1 or later compatible

5V or 3.3V Power Supply

Commercial and Industrial

Operating Temperature Range

5-Byte Detection, 4-Byte Correction

ECC Engine

10 Year Data Retention

RoHS-6 Compliant

5-Year Warranty

PIO 0-6, MWDMA 0-4

PIO 0-6 only (for applications

that require MWDMA access to

be disabled)

PC Card Type II

SLATAxxx(M/G)M1U(I)

Datasheet

128MB to 16GB

ATA PC Card

61000-04497-104, January 2007

SLATAxxx(M/G)M1U(I)

General Description

STEC’s ATA PC Card is a small form factor memory card with no moving

parts, available in capacities from 128MB to 16GB. The standard PC Card

interface provides designers with a true plug-n-play storage device, allowing

for short design cycles and fast time to market.

STEC’s proprietary state-of-the-art flash memory controller is incorporated in

the ATA PC Card, providing high data reliability and endurance. The built-in

ECC engine can detect up to 5-byte errors and correct up to 4-byte errors,

while sophisticated wear leveling algorithms guarantee 2,000,000 Write/Erase

Cycles.

STEC’s ATA PC Card is available in a PC Card Type II package.

STEC’s ATA PC Card is the product of choice in applications requiring high

reliability and high tolerance to shock, vibration, humidity, altitude, and

temperature. Because there are no moving parts, the STEC ATA PC Card is a

reliable alternative to mechanical hard disk drives for mission critical

applications.

Ordering Information

ATA PC Card

Legend:

operating systems, such as Windows XP, that require storage media to be identified as

a fixed drive before it can be used as a bootable drive. Example:

SLATAxxx(M/G)M1U(I)-F.

MWDMA access to be disabled. Example: SLATAxxx(M/G)M1(T2)U(I)-P

SLATA128MM1U(I)

SLATA256MM1U(I)

SLATA512MM1U(I)

SLATA1GM1U(I)

SLATA2GM1U(I)

SLATA3GM1U(I)

SLATA4GM1U(I)

SLATA5GM1U(I)

SLATA6GM1U(I)

SLATA7GM1U(I)

SLATA8GM1U(I)

SLATA10GM1U(I)

SLATA12GM1U(I)

SLATA14GM1U(I)

SLATA16GM1U(I)

(I) = Industrial temperature range (-40ºC to +85 ºC).

Part numbers without (I) = Commercial temperature range (0ºC to 70ºC).

(M/G) indicates if proceeding capacity (xxx) is in Megabytes (M) or Gigabytes (G).

U = RoHS-6 compliant lead-free.

-F = media set to fixed storage for non-removable IDE applications. Use with

-P = firmware programmed for PIO Modes 0-6 only for applications requiring

Part Number

Type II

CF Form Factor

www.stec-inc.com

ATA PC Card

128 Mbytes

256 Mbytes

512 Mbytes

1 GByte

2 GBytes

3 GBytes

4 GBytes

5 GBytes

6 GBytes

7 GBytes

8 GBytes

10 GBytes

12 GBytes

14 GBytes

16 GBytes

Capacity

Related parts for SLATA5GM1U

SLATA5GM1U Summary of contents

Page 1

... Ordering Information ATA PC Card Part Number SLATA128MM1U(I) Type II SLATA256MM1U(I) Type II SLATA512MM1U(I) Type II SLATA1GM1U(I) Type II SLATA2GM1U(I) Type II SLATA3GM1U(I) Type II SLATA4GM1U(I) Type II SLATA5GM1U(I) Type II SLATA6GM1U(I) Type II SLATA7GM1U(I) Type II SLATA8GM1U(I) Type II SLATA10GM1U(I) Type II SLATA12GM1U(I) Type II SLATA14GM1U(I) Type II SLATA16GM1U(I) Type II Legend: (I) = Industrial temperature range (-40ºC to +85 ºC). ...

Page 2

SLATAxxx(M/G)M1U(I) Datasheet Table of Contents 1.0 Product Specifications........................................................................................................3 1.1 Package Dimensions and Pin Locations...................................................................................... 3 1.2 Pin Assignment ............................................................................................................................ 4 1.3 Signal Descriptions....................................................................................................................... 5 1.4 Performance................................................................................................................................. 9 1.5 CHS Parameters .......................................................................................................................... 9 2.0 Environmental Specifications ..........................................................................................10 2.1 Recommended Operating Conditions........................................................................................ ...

Page 3

SLATAxxx(M/G)M1U(I) Datasheet 1.0 Product Specifications 1.1 Package Dimensions and Pin Locations Table 1 and Figure 1show the mechanical dimensions of the PC Card Type II. Table 1: Mechanical dimensions PC Card Type II Parameter Length Width Height (including label area) ...

Page 4

SLATAxxx(M/G)M1U(I) Datasheet 1.2 Pin Assignment Table 2: ATA PC Card Pin Assignment Pin Signal Name Number 1 GND 2 D03 3 D04 4 D05 5 D06 6 D07 7 -CE1 8 A10 9 -OE 10 N/C 11 A09 12 A08 ...

Page 5

SLATAxxx(M/G)M1U(I) Datasheet 1.3 Signal Descriptions Table 3: ATA PC Card Signal Descriptions Signal Name Type BVD2 I/O (PC Card Memory Mode) -SPKR (PC Card I/O Mode) -DASP (True IDE Mode) -CD1, -CD2 I/O (PC Card Memory Mode) -CD1, -CD2 (PC ...

Page 6

SLATAxxx(M/G)M1U(I) Datasheet Signal Name Type -OE I (PC Card Memory Mode) -OE (PC Card I/O Mode) -OE (True IDE Mode) RDY/-BSY O (PC Card Memory Mode) -IREQ (PC Card I/O Mode) INTRQ (True IDE Mode) A10-A0 I (PC Card Memory ...

Page 7

SLATAxxx(M/G)M1U(I) Datasheet Signal Name Type -CSEL I (PC Card Memory Mode) -CSEL (PC Card I/O Mode) -CSEL (True IDE Mode) -REG I (PC Card Memory Mode) Attribute Memory Select -REG (PC Card I/O Mode) -DMACK (not used for part numbers ...

Page 8

SLATAxxx(M/G)M1U(I) Datasheet Signal Name Type -WAIT O (PC Card Memory Mode) -WAIT (PC Card I/O Mode) IORDY (True IDE Mode) GND GND (PC Card Memory Mode) GND (PC Card I/O Mode) GND (True IDE Mode) VCC VCC (PC Card Memory ...

Page 9

SLATAxxx(M/G)M1U(I) Datasheet 1.4 Performance Table 4: ATA PC Card Read/Write Performance Parameter Data transfer rate to/from host Sustained read Sustained write 1.5 CHS Parameters Table 5: CHS Parameters per capacity Capacity 128MB 256MB 512MB 1GB 2GB 4GB 5GB 6GB 7GB ...

Page 10

SLATAxxx(M/G)M1U(I) Datasheet 2.0 Environmental Specifications 2.1 Recommended Operating Conditions Table 6: ATA PC Card Recommended Operating Conditions Parameter Commercial Operating Temperature Industrial Operating Temperature VCC voltage 2.2 Reliability Table 7: ATA PC Card Endurance & Data Reliability Parameter Endurance Data ...

Page 11

SLATAxxx(M/G)M1U(I) Datasheet 3.0 Electrical Specifications 3.1 Absolute Maximum Ratings Table 9: ATA PC Card Absolute Maximum Ratings Parameter Voltage Storage temperature range 3.2 DC Characteristics Measurements at Recommended Operating Conditions unless otherwise specified. Table 10: ATA PC Card DC Characteristics ...

Page 12

SLATAxxx(M/G)M1U(I) Datasheet 3.3 AC Characteristics Measurements at Recommended Operating Conditions, unless otherwise specified. 3.3.1 PC Card Memory Mode Attribute Memory Read Table 11: PC Card Memory Mode Attribute Memory Read AC Characteristics Parameter Read Cycle Time Address Access Time Card ...

Page 13

SLATAxxx(M/G)M1U(I) Datasheet 3.3.2 PC Card Memory Mode Attribute Memory Write Table 12: PC Card Memory Mode Attribute Memory Write AC Characteristics Parameter Write Cycle Time Write Pulse Width Address Setup Time Address Setup Time (-WE) -CE Setup Time (-WE) Data ...

Page 14

SLATAxxx(M/G)M1U(I) Datasheet 3.3.3 PC Card Memory Mode Common Memory Read Table 13: PC Card Memory Mode Common Memory Read AC Characteristics Cycle Time Mode Parameter Symbol Symbol Output Enable ta(OE) Access Time Output Disable tdis(OE) Time from OE Address Setup ...

Page 15

SLATAxxx(M/G)M1U(I) Datasheet 3.3.4 PC Card Memory Mode Common Memory Write Table 14: PC Card Memory Mode Common Memory Write AC Characteristics Cycle Time Mode Parameter Symbol Data Setup before tsu WE (D-WEH) Data Hold following th( Pulse Width ...

Page 16

SLATAxxx(M/G)M1U(I) Datasheet 3.3.5 PC Card I/O Mode Read AC Characteristics Table 15: PC Card I/O Mode Read AC Characteristics Cycle Time Mode Parameter Symbol Data Delay after td(IORD) -IORD Data Hold th(IORD) following -IORD -IORD Width tw(IORD) Time Address Setup ...

Page 17

SLATAxxx(M/G)M1U(I) Datasheet 3.3.6 PC Card I/O Mode Write AC Characteristics Table 16: PC Card I/O Mode Write AC Characteristics Cycle Time Mode Parameter Symbol Data Setup tsu(IOWR) before -IOWR Data Hold th(IOWR) following -IOWR -IOWR Width tw(IOWR) Time Address Setup ...

Page 18

SLATAxxx(M/G)M1U(I) Datasheet 3.3.7 True IDE Mode Register Access Table 17: True IDE Mode Register Access AC Characteristics Parameter Symbol Mode0 Cycle time (min) t0 600 Address valid to -IORD/-IOWR t1 70 (min) setup -IORD/-IOWR pulse width 8bit t2 290 (min) ...

Page 19

SLATAxxx(M/G)M1U(I) Datasheet 3.3.8 True IDE Mode PIO Access Table 18: True IDE Mode PIO Access AC Characteristics Parameter Symbol Mode0 Cycle time (min) t0 600 Address valid to -IORD/-IOWR t1 70 (min) setup -IORD/-IOWR pulse width 8bit t2 290 (min) ...

Page 20

SLATAxxx(M/G)M1U(I) Datasheet Figure 8: True IDE Mode PIO Access Timing Diagram 61000-04497-104, January 2007 ATA PC Card 20 ...

Page 21

SLATAxxx(M/G)M1U(I) Datasheet 3.3.9 True IDE Mode Multiword DMA (not used for part numbers with P) Table 19: True IDE Mode Multiword DMA AC Characteristics Parameter Symbol Cycle time (min) -IORD/-IOWR Asserted Pulse (min) -IORD data access (max) -IORD data hold ...

Page 22

SLATAxxx(M/G)M1U(I) Datasheet 4.0 Host Access Specification 4.1 Task File Register and Byte/Word/Odd-Byte Mode Mappings Please refer to the ATA PC Card standards for complete details on: Task File Register mapping for the interface modes Byte/Word/Odd-byte mode mapping within each of ...

Page 23

SLATAxxx(M/G)M1U(I) Datasheet 4.3 Card Information Structure (CIS) The ATA PC Card uses a Card Information Structure (CIS) as outlined in the Table 20. Table 20: Card Information Structure 0000: Code 01, link Tuple CISTPL_DEVICE (01), length ...

Page 24

SLATAxxx(M/G)M1U(I) Datasheet 003E: Code 1B, link Tuple CISTPL_CFTABLE_ENTRY (1B), length 8 (08) at offset 3E Configuration Table Index is 00 (default) Interface type is Memory BVDs not active, WP not active, ...

Page 25

SLATAxxx(M/G)M1U(I) Datasheet 007D: Code 1B, link Tuple CISTPL_CFTABLE_ENTRY (1B), length 15 (0F) at offset 7D Configuration Table Index is 03 (default) Interface type is ...

Page 26

... Default number of sectors per track Number of sectors per ATA PC Card (word 7 = MSW, word 8 = LSW) Reserved Serial Number in ASCII (40 characters): STEC Proprietary (9 characters) xxxxxxxxx Do not use this word. Before retirement, was buffer type Do not use this word. Before retirement, was buffer size in 512 byte increments # of ECC bytes passed on Read/Write Long commands Firmware revision in ASCII (8 characters): Rev8 ...

Page 27

SLATAxxx(M/G)M1U(I) Datasheet 5.0 Registers This chapter lists the registers of the ATA PC Card. Refer to ATA PC Card standards for further details. 5.1 Configuration Registers In PC Card Mode, four configuration registers, as listed in Table 22, are used. ...

Page 28

SLATAxxx(M/G)M1U(I) Datasheet 5.2 Task File Registers Table 23: ATA PC Card Task File Registers Task File Register The Data Register is a 16-bit read/write register used for transferring data between Data Register the ATA PC Card and the host. This ...

Page 29

SLATAxxx(M/G)M1U(I) Datasheet 6.0 Supported ATA Commands The ATA commands used by the ATA PC Card are listed in Table 24 below. Refer to ATA PC Card standards for details. Table 24: ATA PC Card Supported ATA Commands Command Set Code ...

Page 30

SLATAxxx(M/G)M1U(I) Datasheet Command Set Code 40h (w/ retry) Read Verify Sector(s) 41h (w/o retry Recalibrate 1Xh Request Sense 03h (Extended Error) Seek 7Xh Set Features EFh Set Multiple Mode C6h Set Sleep Mode E6h or 99h Stand By E2h or ...

Page 31

SLATAxxx(M/G)M1U(I) Datasheet Command Set Code Write Long Sector 32h or 33h Write Multiple C5h Write Multiple w/o Erase CDh 30h (w/ retry) Write Sector(s) 31h (w/o retry) Write Sector(s) w/o Erase 38h Write Verify 3Ch Description This command is provided ...

Page 32

... Contact STEC Inc. sales office to obtain the latest specification. All information in this document is provided “as is”. STEC Inc. grants no warranty of any kind with respect to this document, either expressed or implied, including, but not limited to any direct, indirect, special, consequential, or incidental damages ...

Related keywords

SLATA5GM1U datasheet
SLATA5GM1U data sheet
SLATA5GM1U pdf datasheet
SLATA5GM1U component
SLATA5GM1U part
SLATA5GM1U distributor
SLATA5GM1U RoHS
SLATA5GM1U datasheet download