MCIMX31LCVKN5D Freescale, MCIMX31LCVKN5D Datasheet - Page 6

• Manufacturer Part Number: MCIMX31LCVKN5D
• Manufacturer: Freescale

Specifications of MCIMX31LCVKN5D

• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Lead Free Status / RoHS Status: Compliant

Functional Description and Application Information
2.2
Table 3
extended descriptions of the modules, see the reference manual. A cross-reference is provided to the
electrical specifications and timing information for each module with external signal connections.
6
Mnemonic
AUDMUX Digital Audio
1-Wire®
CAMP
Block
DPLL
CSPI
CCM
EPIT
ETM
ECT
EMI
ATA
FIR
shows an alphabetical listing of the modules in the multimedia applications processor. For
Module Inventory
1-Wire Interface Connectivity
Advanced
Technology (AT)
Attachment
Multiplexer
Clock Amplifier
Module
Clock Control
Module
Configurable
Serial Peripheral
Interface (x 3)
Digital Phase
Lock Loop
Embedded
Cross Trigger
External
Memory
Interface
Enhanced
Periodic
Interrupt Timer
Embedded
Trace Macrocell
Fast InfraRed
Interface
Block Name
Peripheral
Connectivity
Peripheral
Multimedia
Peripheral
Clock
Clock
Connectivity
Peripheral
Clock
Debug
Memory
Interface
(EMI)
Timer
Peripheral
Debug/Trace The ETM (from ARM, Ltd.) supports real-time instruction and data
Connectivity
Peripheral
Functional
Grouping
MCIMX31/MCIMX31L Technical Data, Rev. 4.3
Table 3. Digital and Analog Modules
The 1-Wire module provides bi-directional communication between
the ARM11 core and external 1-Wire devices.
The ATA block is an AT attachment host interface. It is designed to
interface with IDE hard disc drives and ATAPI optical disc drives.
The AUDMUX interconnections allow multiple, simultaneous
audio/voice/data flows between the ports in point-to-point or
point-to-multipoint configurations.
The CAMP converts a square wave/sinusoidal input into a rail-to-rail
square wave. The output of CAMP feeds the predivider.
The CCM provides clock, reset, and power management control for
the MCIMX31.
The CSPI is equipped with data FIFOs and is a master/slave
configurable serial peripheral interface module, capable of
interfacing to both SPI master and slave devices.
The DPLLs produce high-frequency on-chip clocks with low
frequency and phase jitters.
Note: External clock sources provide the reference frequencies.
The ECT is composed of three CTIs (Cross Trigger Interface) and
one CTM (Cross Trigger Matrix—key in the multi-core and
multi-peripheral debug strategy.
The EMI includes
The EPIT is a 32-bit “set and forget” timer which starts counting after
the EPIT is enabled by software. It is capable of providing precise
interrupts at regular intervals with minimal processor intervention.
tracing by way of ETM auxiliary I/O port.
This FIR is capable of establishing a 0.576 Mbit/s, 1.152 Mbit/s or 4
Mbit/s half duplex link via a LED and IR detector. It supports 0.576
Mbit/s, 1.152 Mbit/s medium infrared (MIR) physical layer protocol
and 4Mbit/s fast infrared (FIR) physical layer protocol defined by
IrDA, Rev. 1.4.
• Multi-Master Memory Interface (M3IF)
• Enhanced SDRAM Controller (ESDCTL)
• NAND Flash Controller (NFC)
• Wireless External Interface Module (WEIM)
Brief Description
Freescale Semiconductor
4.3.9.3/44,
4.3.9.1/36,
4.3.9.2/39
4.3.10/52
4.3.11/53
Section/
4.3.4/24
4.3.5/25
4.3.6/34
4.3.3/23
4.3.7/34
4.3.8/35
Page
—
—
—
—