5962-89689012A QP SEMICONDUCTOR, 5962-89689012A Datasheet - Page 4

• Manufacturer Part Number: 5962-89689012A
• Manufacturer: QP SEMICONDUCTOR

Specifications of 5962-89689012A

• Logical Function: Mux
• Configuration: 4 x 2:1
• Number Of Inputs: 8
• Number Of Outputs: 4
• Operating Supply Voltage (typ): 5V
• Operating Supply Voltage (min): 4.5V
• Operating Supply Voltage (max): 5.5V
• Power Dissipation: 500mW
• Operating Temp Range: -55C to 125C
• Operating Temperature Classification: Military
• Mounting: Surface Mount
• Pin Count: 20
• Package Type: CLLCC
• Lead Free Status / RoHS Status: Not Compliant

DSCC FORM 2234
APR 97
of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
Unless otherwise specified, the issues of these documents cited in the solicitation or contract.
2500 Wilson Boulevard, Arlington, VA 22201-3834).
of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
JAN class level B devices and as specified herein. Product built to this drawing that is produced by a Qualified Manufacturer
Listing (QML) certified and qualified manufacturer or a manufacturer who has been granted transitional certification to
MIL-PRF-38535 may be processed as QML product in accordance with the manufacturers approved program plan and
qualifying activity approval in accordance with MIL-PRF-38535. This QML flow as documented in the Quality Management
(QM) plan may make modifications to the requirements herein. These modifications shall not affect form, fit, or function of the
device. These modifications shall not affect the PIN as described herein. A "Q" or "QML" certification mark in accordance with
MIL-PRF-38535 is required to identify when the QML flow option is used.
in MIL-PRF-38535, appendix A and herein.
2. APPLICABLE DOCUMENTS
(Copies of these documents are available online at
2.3 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text
3. REQUIREMENTS
3.1 Item requirements. The individual item requirements shall be in accordance with MIL-PRF-38535, appendix A for non-
3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified
3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.2 herein.
3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1.
3.2.3 Truth table. The truth table shall be as specified on figure 2.
2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part
2.2 Non-Government publications. The following document(s) form a part of this document to the extent specified herein.
(Copies of these documents are available online at
DEPARTMENT OF DEFENSE SPECIFICATION
DEPARTMENT OF DEFENSE STANDARDS
DEPARTMENT OF DEFENSE HANDBOOKS
ELECTRONIC INDUSTRIES ALLIANCE (EIA)
MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for.
MIL-STD-883
MIL-STD-1835 -
MIL-HDBK-103 -
MIL-HDBK-780 -
JEDEC Standard No. 20 - Standard for Description of 54/74ACXXXXX and 54/74ACTXXXXX Advanced High-Speed
DEFENSE SUPPLY CENTER COLUMBUS
MICROCIRCUIT DRAWING
COLUMBUS, OHIO 43218-3990
-
STANDARD
Interface Standard Electronic Component Case Outlines.
Standard Microcircuit Drawings.
Test Method Standard Microcircuits.
List of Standard Microcircuit Drawings.
CMOS Devices.
http://www.jedec.org
https://assist.daps.dla.mil/quicksearch/
SIZE
A
or from Electronic Industries Alliance,
REVISION LEVEL
or from the Standardization
D
SHEET
5962-89689
4