HW-FMC-XM105-G Xilinx Inc, HW-FMC-XM105-G Datasheet - Page 18

• Manufacturer Part Number: HW-FMC-XM105-G
• Description: CARD, CONNECTIVITY, FMC XM105
• Manufacturer: Xilinx Inc

Specifications of HW-FMC-XM105-G

• Kit Contents: FMC XM105 Debug Card, Welcome Letter, 4x Mounting Screws, 2x Standoffs
• Features: VITA 57.1 FMC HPC Connector, Power Good LEDs
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Chapter 1: XM105
18
2. Connector J6 6-pin Header
See the Xilinx board user guides and schematics for a description of features provided by
LPC and/or HPC interfaces contained on the board, including power supply
specifications, FPGA banking connectivity, and FPGA pin assignments.
•
•
•
See the VITA57.1 Specification at
FMC.
This 3 x 2 position header provides a means to manually configure XM105 voltage
connections provided to the J16 connector by configuring the shunts on the XM105. Shunts
are not provided with the kit.
For 3.3V power:
For VADJ power:
Xilinx boards provide fixed 2.5V power to the VADJ pins of the FMC connector.
For SP601 LPC interface, see
For SP605 LPC interface, see
For ML605 LPC and HPC interfaces, see
Install a shunt on connector J6-1 to J6-3 and another shunt on connector J6-2 to J6-4 to
connect the board 3.3V power to the HDR_POWER net on connector J16 pins 1 and 2.
Install a shunt on connector J6-3 to J6-5 and another shunt on connector J6-4 to J6-6
connect the board VADJ power to the HDR_POWER net on connector J16 pins 1 and 2.
www.xilinx.com
www.vita.com/fmc.html
UG518
UG526
SP601 Hardware User Guide
SP605 Hardware User Guide
UG534
ML605 Hardware User Guide
FMC XM105 Debug Card User Guide
for additional information on
UG537 (v1.2) September 24, 2010