323167 TE Connectivity, 323167 Datasheet - Page 2

• Manufacturer Part Number: 323167
• Description: STRATO-THERM, HR 8 5/16 NIPL
• Manufacturer: TE Connectivity
• Series: 323r
• Type: Closed Barrelr

Specifications of 323167

• Rohs Compliant: YES
• Product: Rings
• Wire Size (awg): 8
• Stud / Tab Size: 5/16 (M8)
• Insulation: Not Insulated
• Gender: Female
• Contact Plating: Nickel
• Contact Material: Copper
• Operating Temperature Range: 343 C
• Terminal Shape: Ring Tongue
• Receptacle Style: Straight
• Body Style: SOLISTRAND, STRATO-THERM
• Barrel Type: Closed Barrel
• Wire/cable Type: Regular Wire
• Insulation Support: Non-Insulation Support
• Stud Diameter (mm [in]): 8.33 [0.328]
• Stud Size: 5/16 [M8]
• Shape: RING-084
• Heavy Duty: No
• Finish: Nickel
• Wire/cable Size (cma): 13,100 – 20,800
• Wire Range (mm [awg]): 8.00² [8]
• Tongue Material Thickness (mm [in]): 1.30 [0.051]
• Government/industry Qualification: No
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• High Temperature Rating (°c [°f]): 343 [650]
• Packaging Method: Loose Piece
• Lead Free Status / Rohs Status: Details

3.2.
3.3.
3.4.
3.5.
Rev C
Initial exam ination of product.
Final exam ination of product.
Voltage drop.
Vibration, sinusoidal.
Term ination tensile strength.
Materials
Materials used in the construction of this product shall be as specified on the applicable product
drawing.
Ratings
!
!
Perform ance and Test Description
Product is designed to m eet the electrical, m echanical and environm ental perform ance requirem ents
specified in Figure 1. Unless otherwise specified, all tests shall be perform ed at am bient environm ental
conditions.
Test Requirem ents and Procedures Sum m ary
Test Description
Current: See Figure 3 for applicable current carrying capability
Tem perature: -75 to 150°C
Meets requirem ents of product
drawing.
Meets visual requirem ents.
See Figure 3.
No discontinuities of 1 m icrosecond
or longer duration.
See Note.
See Figure 3.
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirem ent
EIA-364-18.
EIA-364-8.
EIA-364-18.
Visual and dim ensional (C of C)
inspection per product drawing.
Visual inspection.
EIA-364-6.
Measure m illivolt drop of term inated
specim ens. Voltage probe test
points shall be at the intersection of
the tongue and barrel of the
term inal; and the current carrying
conductor 1/16 inch back from the
wire receiving end of the term inal
with access to the wire m ade by
puncturing the insulation with the
probe tip.
EIA-364-28, Test Condition I.
Subject term inated specim ens to
10 to 55 to 10 Hz traversed in 1
m inute with 1.5 m m [.06 in]
m axim um total excursion. 18 hours
in each of 2 m utually perpendicular
planes.
Apply axial load to specim en at a
m axim um rate of 25 ± 6 m m per
m inute until failure.
Procedure
108-2193
2 of 4