323167 TE Connectivity, 323167 Datasheet - Page 4

• Manufacturer Part Number: 323167
• Description: STRATO-THERM, HR 8 5/16 NIPL
• Manufacturer: TE Connectivity
• Series: 323r
• Type: Closed Barrelr

Specifications of 323167

• Rohs Compliant: YES
• Product: Rings
• Wire Size (awg): 8
• Stud / Tab Size: 5/16 (M8)
• Insulation: Not Insulated
• Gender: Female
• Contact Plating: Nickel
• Contact Material: Copper
• Operating Temperature Range: 343 C
• Terminal Shape: Ring Tongue
• Receptacle Style: Straight
• Body Style: SOLISTRAND, STRATO-THERM
• Barrel Type: Closed Barrel
• Wire/cable Type: Regular Wire
• Insulation Support: Non-Insulation Support
• Stud Diameter (mm [in]): 8.33 [0.328]
• Stud Size: 5/16 [M8]
• Shape: RING-084
• Heavy Duty: No
• Finish: Nickel
• Wire/cable Size (cma): 13,100 – 20,800
• Wire Range (mm [awg]): 8.00² [8]
• Tongue Material Thickness (mm [in]): 1.30 [0.051]
• Government/industry Qualification: No
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• High Temperature Rating (°c [°f]): 343 [650]
• Packaging Method: Loose Piece
• Lead Free Status / Rohs Status: Details

4.
4.1.
4.2.
4.3.
4.4.
Rev C
QUALITY ASSURANCE PROVISIONS
Qualification Testing
A.
B.
Requalification Testing
If changes significantly affecting form , fit or function are m ade to the product or m anufacturing process,
product assurance shall coordinate requalification testing, consisting of all or part of the original testing
sequence as determ ined by developm ent/product, quality and reliability engineering.
Acceptance
Acceptance is based on verification that the product m eets the requirem ents of Figure 1. Failures
attributed to equipm ent, test setup or operator deficiencies shall not disqualify the product. If product
failure occurs, corrective action shall be taken and specim ens resubm itted for qualification. Testing to
confirm corrective action is required before resubm ittal.
Quality Conform ance Inspection
The applicable quality inspection plan shall specify the sam pling acceptable quality level to be used.
Dim ensional and functional requirem ents shall be in accordance with the applicable product drawing
and this specification.
Specim en Selection
Specim ens shall be prepared in accordance with applicable Instruction Sheets and shall be
selected at random from current production. All test groups shall each consist of 10 term inals of
each wire size.
Test Sequence
Qualification inspection shall be verified by testing specim ens as specified in Figure 2.
W ire Size
1/0
8
6
4
2
Millivolt Drop & Tensile Strength Requirem ents
Test Current
101
135
181
245
73
Term inal Millivolt Drop
Figure 3
(m axim um )
5.0
5.0
5.0
5.0
5.0
(pounds m inim um )
Tensile Strength
225
300
400
550
700
108-2193
4 of 4