INT-1532-L-5-M-001=1 TE Connectivity, INT-1532-L-5-M-001=1 Datasheet - Page 16

• Manufacturer Part Number: INT-1532-L-5-M-001=1
• Description: DIGITAL PANEL METER, 4-DIGIT, 57.7V TO 139V / 100V TO 240V
• Manufacturer: TE Connectivity

Specifications of INT-1532-L-5-M-001=1

• No. Of Digits / Alpha: 4
• Meter Function: Digital
• Meter Range: 0mA To 20mA
• Digit Height: 96mm
• Supply Voltage Range: 57.7V To 139V / 100V To 240V
• Power Consumption: 3W

DIN Integra 2000 Series
A single multi-functional Integra 2000 digital metering system replaces
numerous single-function instruments, providing significant cost savings
and reduced wiring times for all power monitoring applications.
Integra 2000 digital metering systems provide high accuracy true
rms measurement and display of up to 103 electrical and power
quality parameters.
Status information can be monitored via the high contrast graphical LCD
display with LED backlight, which is ideally suited for low ambient light
conditions. Alternatively, optional pulsed, analogue and digital
communication outputs allow status information of measured
parameters to be communicated into building management systems.
Operation
A five-button menu driven interface on the front panel of Integra 2000 enables the simple
programming of VT and CT ratios, configuring selected communication options and
adjustment of operating parameters.
Integra 2000 provides simple and quick access to the measured electrical data, with active
reading screens typically presenting in a 4-line 4-digit format. The default screen is factory
set to display volts, amps, frequency and watts, but can be customised to display any four
measured parameters. User-friendly soft prompts are assigned to each of the four main
parameter buttons, guiding the user easily through the menu structure to configure and
monitor chosen parameters with a minimum number of button presses.
To prevent unauthorised access to configuration settings, all set-up screens offer password
protection. Once configured, status information can be viewed by scrolling through up to
42 backlit dot-matrix LCD screens featuring different character font sizes for maximum
clarity. Optional pulsed, analogue or digital outputs allow status information of measured
parameters to be communicated into building management systems.
System Input
Designed for all low, medium and high-voltage switchgear and distribution systems, the
Integra 2000 offers programmable VT and CT ratio capability. The unit is suitable for
direct connection to many common voltages with 5A CT inputs.
System Outputs
Pulsed Outputs
Integra 2000 offers two pulsed outputs enabling the retransmission of time-based
parameters. Each relay can be assigned to kWh or kVArh (import or export) kVAh and
kAh, and will pulse at a rate proportional to the measured active energy, with both
pulse width and rate easily programmable. The output relays have fully isolated volt free
contacts, with connection via screw-clamp terminals.
Analogue Outputs
Four analogue outputs may also be included, enabling onward transmission of linear
parameters using industry standard analogue signalling. Each 4/20mA analogue channel
can be assigned to one of 44 measured parameters.
Digital Communications
RS485 Modbus RTU
Integra 2000 digital metering systems offer an RS485 communication port for direct
connection to SCADA systems using either the Modbus RTU, or the Johnson Controls
Metasys NII protocols. Remote monitoring enables the user to record system
parameters in real time, using high resolution numbers. The Modbus protocol
establishes the format for the master’s query by placing it into the device address. The
slave’s response is also constructed using the Modbus protocol; it contains the fields
confirming the action taken, the data to be returned, and an error-checking field.
Lonworks Interface
The Lonworks interface option is designed according to the LonMark Interoperability
Guidelines version 3.2. This ensures Integra digital metering systems can be integrated
into a single control network without requiring custom node or network tool development.
Features
Measurement, display and
communication of up to 103 electrical
and power parameters
High contrast LCD display with LED
backlight
True rms measurement
Pulsed, analogue and digital
communications
Modbus, Johnson Controls and
Lonworks interface options
Fully programmable VT and CT ratios
Benefits
Replaces multiple single function
instruments
Significant cost savings
Reduced wiring times
Simple menu driven interface
User definable outputs and scaling
Accurate at 4 quadrant power factors
Import and export monitoring
Applications
Switchgear
Distribution systems
Generator sets
Control panels
Embedded generation
Energy management
Building management
Utility power monitoring
Process control
Motor monitoring
Feeder panels
Distribution pillars
Compliant With
IEC1010/BSEN 61010-1
IEC 664, VDE 0110, PD 6499
15