148384-5 TE Connectivity, 148384-5 Datasheet - Page 18

• Manufacturer Part Number: 148384-5
• Description: SOCKET, DIN41612, STRAIGHT, M, 24+8WAY
• Manufacturer: TE Connectivity

Specifications of 148384-5

• Connector Type: Pitch Spacing
• No. Of Contacts: 32
• Gender: Receptacle
• No. Of Rows: 3
• Rows Loaded: A + B + C
• Contact Termination: Through Hole
• Contact Material: Phosphor Bronze
• Contact: RoHS Compliant
• Pitch Spacing: 2.54mm
• Contact Plating: Gold
• Rohs Compliant: Yes
• Product Series: Type M
• Mount Angle: Vertical
• Post Type: Compliant Post
• Din Level: II
• Loaded With Single Contacts Only: Yes
• Color: Gray
• Toolless (flat Rock): Yes
• Termination Post Length (mm [in]): 6.00 [0.236]
• Solder Tail Contact Plating: Tin-Lead over Nickel
• Number Of Signal Contacts: 24
• Contact Type: Socket
• Number Of Power Or Coaxial Contacts: 8
• Preloaded: Yes
• Contact Configuration: Coaxial, Power
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold Flash over Palladium Nickel
• Connector Style: Receptacle
• Housing Material: Thermoplastic - GF
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Pcb Thickness, Recommended (mm [in]): 1.57 [0.062]
• Application: Board-to-Board Power

6. VISUAL AID
Figure 17 shows a typical application of a Eurocard Connector. This illustration should be used by production
personnel to ensure a correctly applied product. Applications which DO NOT appear correct should be
inspected using the information in the preceding pages of this specification and in the instructional material
shipped with the product.
18 of 18
PC BOARD MUST
NOT BE DAMAGED
HOUSING MUST
BE BOTTOMED
AGAINST PC BOARD
SHROUD OF PROPER SIZE
AND HEIGHT MUST BE
PLACED OVER CONTACTS
AND SEATED ON PC BOARD
BOARDLOCKS
MUST BE IN PLACE
THROUGH PC BOARD
CONTACTS MUST
BE STRAIGHT
AND UNDAMAGED
FIGURE 17. VISUAL AID
WIRE WRAP MUST
BE TIGHT AND
SECURE
PINS MUST BE STRAIGHT
AND UNDAMAGED
HARDWARE MUST BE
SECURELY FASTENED
SOLDER FILLETS
MUST BE FORMED
EVENLY AROUND
SOLDER TINES
114- 9014
Rev G