63900-1 TE Connectivity, 63900-1 Datasheet - Page 23

• Manufacturer Part Number: 63900-1
• Description: TAB, FASTON 250 PCB 032TPCUBRLP
• Manufacturer: TE Connectivity
• Series: 250r

Specifications of 63900-1

• Connector Type: Tab Boardmount
• Termination Method: Quick Disconnect
• Stud/tab Size: 0.25 X 0.032"
• Contact Material: Brass
• Contact Plating: Tin
• Contact: RoHS Compliant
• Product Type: Terminal
• Terminal Type: Tab
• Mating Area Interface Dimensions (mm [in]): 6.35 x 0.81 [.250 x .032]
• Finish: Tin
• Mount Angle: Straight
• Insulation Support: Without
• Pcb Hole Diameter (mm [in]): 1.40 [0.055]
• Dimple: Without
• Tab Type: Printed Circuit Board
• Stud Hole: Without
• Stock Thickness (mm [in]): 0.81 [0.032]
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Pcb Thickness, Recommended (mm [in]): 3.18 [0.125]
• Packaging Method: Loose Piece

Product Facts
■
■
■
■
■
■
Technical Documents
Product Specification
108-1025
108-1059
Application Specification
114-1008
Instruction Sheets
408-7850
408-7951
408-7963
408-7698
408-7850
408-7377
408-7345
Catalog 82159
Revised 12-07
www.tycoelectronics.com
Quick connect or disconnect
Automatic or semiautomatic
application of strip form
receptacles to wire
Receptacles for wire size
range 28 AWG [0.08] thru
17 AWG [1.0] and tinsel wire
Automatic or semiautomatic
insertion of strip form pins
to printed circuit boards
Solid or formed pins, single-
or double-sided printed
circuit board capability
Choice of materials and
platings
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Printed Circuit Board Terminals and Disconnects
Printed Circuit Board Disconnects
Tyco Electronics printed
circuit disconnect embodies
the dual features of
automation and the ability to
make quick wiring changes.
The special formed pins,
available in .058 [1.47] and
.093 [2.36] diameters, can
be inserted in a printed
circuit board quickly and
reliably by fully automatic or
semiautomatic machinery.
The solid pin family, in .058
[1.47] diameter, is attached
manually; its knurled edge
retains it mechanically in
the board until soldering is
complete. All pins must
be soldered to insure
mechanical and electrical
reliability. Pins may be used
for either single or double-
sided pc boards. The
receptacles are applied
quickly and efficiently to
wire using semiautomatic
AMP-O-LECTRIC or fully
automatic AMPOMATOR
machines.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
All receptacles feature a
precision wire crimp with
an insulation crimp for high
mechanical strength. A
variety of wire and insulation
ranges are available as
listed. The combination of
the pin and receptacle
enables users to bring a
variety of wires to a printed
circuit board and offers
the capability of a quick
connect or disconnect.
The product is ideal for use
in prototype and production
applications, particularly
where wiring changes
or rapid pc board
interconnections are
required. Specific users
include radio, television,
test equipment, computer
and business machine
industries.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
23