PEF80912HV14NP Lantiq, PEF80912HV14NP Datasheet - Page 34

• Manufacturer Part Number: PEF80912HV14NP
• Manufacturer: Lantiq

Specifications of PEF80912HV14NP

• Lead Free Status / Rohs Status: Supplier Unconfirmed

BBD0 /
BBD1
TL
Signals on IOM
The Data (B+B+D) is set to all ’1’s in all states besides the states listed in
•:
Table 10
Dependence of Outputs
• Outputs denoted with
•
Table 11
EOC Command
received ’LBBD’
received no ’LBBD’ or ’RTN’
after an ’LBBD’
Data Sheet
Synchronized1
Synchronized2
Wait for ACT
Transparent
Error S/T
Pend. Deac. S/T
Pend. Deac. U
Analog Loop Back
Signal output on U
the state machine according to
States with Operational Data on IOM
Signal Output on U
BBD0/1 Detected
These signals are set if either ’1' (BBD1) or ’0' (BBD0) were detected in
4 subsequent basic frames. It is used as a criterion that the receiver has
acquired frame synchronization and both its EC- and EQ-coefficients
have converged. BBD0 corresponds to the received signal SL2 in case
of a normal activation, BBD1 corresponds to the internally received
signal SN3 in case of analog loop back.
Awake tone detected
The U-transceiver is requested to start an activation procedure.

-2
k0
depends on the received EOC command and on the history of
1)
in
Figure
History of the State Machine
no influence
state ’Transparent’ has not been
reached previously during this
activation procedure
state ’Transparent’ has been
reached previously during this
activation procedure
Table
k0
10:
11:
26

-2
Functional Description
Signal output on U
PEF 80912/80913
SN3T
SN3T
SN3
Table
2001-03-29
10.
k0