SLATAFL6GBJI STEC, SLATAFL6GBJI Datasheet - Page 26

• Manufacturer Part Number: SLATAFL6GBJI
• Manufacturer: STEC
• Type: ATA Cardr

Specifications of SLATAFL6GBJI

• Density: 6GByte
• Operating Supply Voltage (typ): 3.3/5V
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Package Type: Not Required
• Mounting: Socket
• Pin Count: 68
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (min): 3.18/4.75V
• Operating Supply Voltage (max): 3.465/5.25V
• Programmable: Yes
• Lead Free Status / Rohs Status: Not Compliant

SimpleTech P/N:
(where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp;
F=fixed device; S=small data packet optimized)
Pin Replacement Register
(Address 204h)
This register is used for providing the signal state of -IREQ
when the card is configured as the I/O card interface.
Socket and Copy Register
(Address 206h)
This read and write register is used to identify the card from
other cards. This register should be set by the host before this
card’s Configuration Option register is set.
Initial Value: 0Ch
Name
CRDY/-BSY (HOST->)
CWProt (HOST->)
RRDY/-BSY (HOST->)
RWProt (HOST->)
Initial Value: 00h
Name
DRV# (HOST->)
bit7
bit7
0
0
SLATAFLxxxJ(U)(I)-(F)(S)
bit6
bit6
0
0
R / W
R/W
R / W
R / W
CRDY/-BSY CWProt
R/W
R
R
Function
These fields are used to configure mulitple cards. When the host configures multiple cards,
the card’s copy number is written in this field. In this way, the host can perform the card’s
master/slave organization.
bit5
bit5
0
This bit is set to “1” when the RWProt changes state. This bit may also be written by
Function
This bit is set to “1” when the RRDY/-BSY bit changes state. This bit may also be
written by the host.
the host.
This bit is used to determine the internal state of the RDY/BSY signal. This bit may be
used to determine the state of the Ready/Busy as this pin has been reallocated for use
as interrupt request on an I/O card.
This bit indicates the write protect status. When set, indicates write protect. When
cleared, indicates that write is enabled.
DRV#
bit4
bit4
bit3
bit3
1
1
Document Part Number 61000-02810-110 July 2005
bit2
bit2
1`
1
RRDY/-BSY RWProt
bit1
bit1
0
bit0
bit0
0
PC CARD
Page 26