SLATAFL6GBJI STEC, SLATAFL6GBJI Datasheet - Page 8

• Manufacturer Part Number: SLATAFL6GBJI
• Manufacturer: STEC
• Type: ATA Cardr

Specifications of SLATAFL6GBJI

• Density: 6GByte
• Operating Supply Voltage (typ): 3.3/5V
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Package Type: Not Required
• Mounting: Socket
• Pin Count: 68
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (min): 3.18/4.75V
• Operating Supply Voltage (max): 3.465/5.25V
• Programmable: Yes
• Lead Free Status / Rohs Status: Not Compliant

SimpleTech P/N:
(where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp;
F=fixed device; S=small data packet optimized)
SIGNAL DESCRIPTIONS
-WAIT
(PC Card Memory Mode)
-WAIT
(PC Card I/O Mode)
IORDY
(True IDE Mode)
GND
(PC Card Memory Mode)
GND
(PC Card I/O Mode)
GND
(True IDE Mode)
VCC
(PC Card Memory Mode)
VCC
(PC Card I/O Mode)
VCC
(True IDE Mode)
RESET
(PC Card Memory Mode)
RESET
(PC Card I/O Mode)
-RESET
(True IDE Mode)
-VS1
-VS2
(PC Card Memory Mode)
-VS1
-VS2
(PC Card I/O Mode)
-VS1
-VS2
(True IDE Mode)
Signal Name
SLATAFLxxxJ(U)(I)-(F)(S)
Dir
—
—
O
O
I
1, 34, 35, 68
17, 51
Pin
59
58
43
57
(continued)
This signal is not used by the card, and is pulled up to VCC through a 4.7K
ohm resistor.
This signal is not used by the card, and is pulled up to VCC through a 4.7K
ohm resistor.
This signal is not used by the card, and is pulled up to VCC through a 4.7K
ohm resistor.
Ground
Ground
Ground
+5 V or 3.3V power
+5 V or 3.3V power
+5 V or 3.3V power
When RESET is high, this signal resets the card. The card is reset only at
power up if this signal is left high or open from power-up. The card can
also be reset when the soft reset bit in the Card Configuration Option
Register is set.
This signal is the same as the PC Card Memory Mode signal.
In the True IDE Mode this input pin is the active low hardware reset from
the host.
read at either 3.3 volts or 5.0 volts.
This signal is the same for all models.
This signal is not used in IDE Mode.
-VS1 is grounded, and -VS2 is not connected so that the card CIS can be
Document Part Number 61000-02810-110 July 2005
Description
PC CARD
Page 8