0640030100 Molex Inc, 0640030100 Datasheet - Page 13

• Manufacturer Part Number: 0640030100
• Manufacturer: Molex Inc

Specifications of 0640030100

• Lead Free Status / Rohs Status: RoHS Not Applicable

RHT-1992 Hand Crimp Tool
Doc No. 64003-0100 Release Date: 10-03-02
Revision: C
Maintenance
It is recommended that each operator of the tool be made
aware of, and responsible for, the following maintenance
steps:
1. Remove dust, moisture and other contaminants with
2. Do not use any abrasive materials that could damage
3. Make certain all pins; pivot points and bearing
4. When tool is not in use, keep the handles closed to prevent objects from becoming lodged in the crimping dies,
Miscrimps or Jams
Should this tool ever become stuck or jammed in a partially closed position,
The tool will open easily by pressing the ratchet release lever (See Figure 7).
a clean brush, or soft, lint-free cloth.
the tool.
surfaces are protected with a thin coat of high quality
machine oil. Do not oil excessively. The 64003-0100 (RHT-1992) was engineered for durability, but like any
fine piece of equipment, it needs cleaning and lubrication for a maximum service life of trouble-free crimping. A
light oil, such as 30 weight automotive oil used at the oil points shown in Figure 6, every 5,000 crimps or 3
months will significantly enhance the tool life and ensure a stable calibration.
and store the tool in a clean, dry area.
Note: Whenever crimping without the locator, make sure the seam of the terminal is oriented up or down in
the tool if using unbrazed product, as this will provide higher pull force values.
Revision Date: 09-02-04
RELEASE LEVER
RATCHET
PUSH UP
LOCKING SCREW
ADJUSTMENT
UNCONTROLLED COPY
PRELOAD
TEST POINT
PRELOAD
TEST POINT
PRELOAD
Figure 6
Do Not force the handles open or closed.
Figure 7
Figure 7
1.00
LUBRICATION POINTS (BOTH SIDES)
LIGHT OIL (EVERY 3 MONTHS OR
1.00
5,000 CRIMPS)
Page 13 of 16