M68EML08JLJK Freescale Semiconductor, M68EML08JLJK Datasheet - Page 10

• Manufacturer Part Number: M68EML08JLJK
• Manufacturer: Freescale Semiconductor

Specifications of M68EML08JLJK

• Lead Free Status / Rohs Status: Not Compliant

M68EML08JLJK Quick Start Guide
3 - Connect the emulation module to your target system
M68EML08JLJK Emulation Module - Version 1.0
10
To install the M68EML08JLJK in an MMEVS0508 Motorola Modular
Evaluation System (MMEVS), take the following steps:
Use the supplied target flex cable, appropriate target head adapter, and surface
mount adapter to connect the emulation module to your target system.
If the M68EML08JLJK is in an MMDS station module:
If the M68EML08JLJK is in an MMEVS platform board:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Fit together M68EML08JLJK connectors P2 and P3 (on the bottom of
the board) to connectors P11 and P12, respectively
Snap the corners of the EM onto the plastic standoffs.
Connect the target cable, if appropriate
Replace the panel.
Fit together EM connectors P2 and P3 (on the bottom of the board) and
platform-board connectors P6 and P7, respectively.
Snap the corners of the EM onto the plastic standoffs
Connect the target cable, if appropriate
Remove the access panel
Plug the appropriate end of the flex cable plugs into M68EML08JLJK
connectors P4 and P5.
Run the flex cable through the slit in the station-module enclosure,
Replace the access panel.
Plug the free end of the flex cable into the target head.
Solder the appropriate surface mount adapter to your target if necessary.
Plug the target head into the surface mount adapter on your target system.
Plug the appropriate end of the flex cable plugs into M68EML08JLJK
connectors P4 and P5.
Plug the free end of the flex cable into the target head.
M68EML08JLJK Quick Start Guide
User’s Manual
MOTOROLA