AT45DB642D-CNU SL954 Atmel, AT45DB642D-CNU SL954 Datasheet - Page 13

• Manufacturer Part Number: AT45DB642D-CNU SL954
• Manufacturer: Atmel

Specifications of AT45DB642D-CNU SL954

• Density: 64Mb
• Access Time (max): 6ns
• Interface Type: Parallel/Serial-SPI
• Address Bus: 1/8Bit
• Operating Supply Voltage (typ): 3.3V
• Operating Temp Range: -40C to 85C
• Package Type: CASON
• Program/erase Volt (typ): 2.7 to 3.6V
• Sync/async: Synchronous
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (min): 2.7V
• Operating Supply Voltage (max): 3.6V
• Word Size: 8b
• Number Of Words: 8M
• Supply Current: 15mA
• Mounting: Surface Mount
• Pin Count: 8
• Lead Free Status / Rohs Status: Compliant

8.1
8.1.1
8.1.2
3542K–DFLASH–04/09
Software Sector Protection
Enable Sector Protection Command
Disable Sector Protection Command
Sectors specified for protection in the Sector Protection Register can be protected from program
and erase operations by issuing the Enable Sector Protection command. To enable the sector
protection using the software controlled method, the CS pin must first be asserted as it would be
with any other command. Once the CS pin has been asserted, the appropriate 4-byte command
sequence must be clocked in via the input pins (SI or I/O7-I/O0). After the last bit of the com-
mand sequence has been clocked in, the CS pin must be deasserted after which the sector
protection will be enabled.
Figure 8-1.
To disable the sector protection using the software controlled method, the CS pin must first be
asserted as it would be with any other command. Once the CS pin has been asserted, the
appropriate 4-byte sequence for the Disable Sector Protection command must be clocked in via
the input pins (SI or I/O7-I/O0). After the last bit of the command sequence has been clocked in,
the CS pin must be deasserted after which the sector protection will be disabled. The WP pin
must be in the deasserted state; otherwise, the Disable Sector Protection command will be
ignored.
Figure 8-2.
Command
Enable Sector Protection
Command
Disable Sector Protection
SI or IO
SI or IO
Enable Sector Protection
Disable Sector Protection
7
7
- IO
- IO
CS
CS
0
0
Each transition
represents 8 bits
Each transition
represents 8 bits
Opcode
Opcode
Byte 1
Byte 1
Byte 1
Byte 1
3DH
3DH
Opcode
Opcode
Byte 2
Byte 2
Byte 2
Byte 2
2AH
2AH
Opcode
Opcode
Byte 3
Byte 3
Opcode
Opcode
Byte 4
Byte 4
Byte 3
Byte 3
7FH
7FH
Byte 4
Byte 4
A9H
9AH
13