BOXD865GLCL Intel, BOXD865GLCL Datasheet - Page 117

• Manufacturer Part Number: BOXD865GLCL
• Manufacturer: Intel

Specifications of BOXD865GLCL

• Lead Free Status / Rohs Status: Supplier Unconfirmed

Table 62.
Note:
Feature
Drive Installed
Type
Maximum Capacity
LBA/Large Mode
Block Mode
PIO Mode
DMA Mode
S.M.A.R.T.
Cable Detected
If an LS-120 drive is attached to the system, a row entitled ARMD Emulation Type will be displayed in the above
table. The BIOS will always recognize the drive as an ATAPI floppy drive. The ARMD Emulation Type should
always be set to Floppy.
SATA/PATA Submenus
Options
No options
No options
Auto (default)
0
1
2
3
4
No options
Auto (default)
User
Disabled
Auto (default)
Disabled
Auto (default)
Auto (default)
SWDMA0
SWDMA1
SWDMA2
MWDMA0
MWDMA1
MWDMA2
UDMA0
UDMA1
UDMA2
Auto (default)
Disabled
Enabled
Description
Displays the type of drive installed.
Specifies the IDE configuration mode for IDE devices.
User allows capabilities to be changed.
Auto fills-in capabilities from ATA/ATAPI device.
Displays the drive capacity.
Displays whether automatic translation mode is
enabled for the hard disk.
(This item is read-only unless Type is set to User.)
Displays whether automatic multiple sector data
transfers are enabled.
(This item is read-only unless Type is set to User.)
Sets the PIO mode.
(This item is read-only unless Type is set to User.)
Specifies the DMA mode for the drive.
Auto = Auto-detected
SWDMAn = Single Word DMAn
SWDMAn = Multi Word DMAn
UDMAn = Ultra DMAn
(This item is read-only unless Type is set to User.)
Enables/disables S.M.A.R.T. (Self-Monitoring, Analysis,
and Reporting Technology).
(This item is read-only unless Type is set to User.)
Displays the type of cable connected to the Parallel
ATA IDE interface: 40-conductor or 80-conductor (for
ATA-100 peripherals).
BIOS Setup Program
117