BOXD865GLCL Intel, BOXD865GLCL Datasheet - Page 131

• Manufacturer Part Number: BOXD865GLCL
• Manufacturer: Intel

Specifications of BOXD865GLCL

• Lead Free Status / Rohs Status: Supplier Unconfirmed

4.7.4 ATAPI CD-ROM Drives Submenu
4.8 Exit Menu
Note:
To access this menu, select Boot on the menu bar and then ATAPI CD-ROM Drives.
The submenu represented in Table 77 is for setting ATAPI CD-ROM drive priority.
Table 77.
To access this menu, select Exit from the menu bar at the top of the screen.
The menu represented in Table 78 is for exiting the BIOS Setup program, saving changes, and
loading and saving defaults.
Table 78.
Feature
1
(Note)
Feature
Exit Saving Changes
Exit Discarding Changes Exits without saving any changes made in the BIOS Setup program.
Load Optimal Defaults
Load Custom Defaults
Save Custom Defaults
Discard Changes
Maintenance
Maintenance
st
ATAPI CDROM
This boot device submenu appears only if at least one boot device of this type is installed. This list will display up
to four ATAPI CD-ROM drives, the maximum number of ATAPI CD-ROM drives supported by the BIOS.
ATAPI CD-ROM Drives Submenu
Exit Menu
Main
Main
Description
Exits and saves the changes in CMOS SRAM.
Loads the optimal default values for all the Setup options.
Loads the custom defaults for Setup options.
Saves the current values as custom defaults. Normally, the BIOS reads the
Setup values from flash memory. If this memory is corrupted, the BIOS reads the
custom defaults. If no custom defaults are set, the BIOS reads the factory
defaults.
Discards changes without exiting Setup. The option values present when the
computer was turned on are used.
Options
Dependent on installed
ATAPI CD-ROM drives
Advanced
Advanced
Security
Security
Description
Specifies the boot sequence from the available
ATAPI CD-ROM drives. To specify boot sequence:
1.
2.
Select the boot device with < > or < >.
Press <Enter> to set the selection as the
intended boot device.
Power
Power
Boot Device Priority
Hard Disk Drives
Removable Devices
ATAPI CD-ROM Drives
Boot
Boot
BIOS Setup Program
Exit
Exit
131