ST626XCKITEU STMicroelectronics, ST626XCKITEU Datasheet - Page 35

• Manufacturer Part Number: ST626XCKITEU
• Manufacturer: STMicroelectronics

Specifications of ST626XCKITEU

• Lead Free Status / Rohs Status: Supplier Unconfirmed

7.4 Setting Up the Starter Kit Board for In-Circuit Programming
1 Power down the Starter Kit board.
2 Set the DEVICE jumpers W10 to W13 (marked 3 on the Starter Kit board diagram on
3 Select the PROG mode using the jumpers marked W1 and W2 (marked 18 on the Starter
4 Connect the Parallel port P1 on the Starter Kit board to a spare parallel port on your PC us-
5 Connect your application board to the connector J1 (marked 1 on the Starter Kit board dia-
6 Power up your Starter Kit board.
You can now use Epromer to program the microcontroller that is on your own board.
Note: Epromer does not work under Windows NT.
To run Epromer from Windows 3.x, double-click the Epromer icon in the ST6 Tools group.
page 11) to ST6265, as shown in the following diagram:
Kit board diagram on page 11), as shown in the diagram below:
ing the cable provided with the starter kit.
gram on page 11) on the Starter Kit board.
D
E
V
C
E
I
10
W
M
O
D
E
W
1
ST6260/62
USER
PROG
ST6265
W
2
Programming ST6 Microcontrollers
13
W
35/41
39