AP-6-21 Amphenol, AP-6-21 Datasheet - Page 129

• Manufacturer Part Number: AP-6-21
• Description: Loudspeaker Connectors FEMALE CHASSIS MNT
• Manufacturer: Amphenol

Specifications of AP-6-21

• Standard: EP, AP
• Gender: Female
• Number Of Positions / Contacts: 6
• Contact Plating: Tin
• Color: Black
• Contact Material: Brass
• Voltage Rating: 200 Volts
• Current Rating: 20 Amps
• Mounting Style: Chassis (Panel)
• Termination Style: Solder
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

CONNECTOR WIRING INFORMATION
ENTERTAINMENT INTERCONNECT CATALOGUE
XLR (Microphone / Patch Cables)
PDN (Speaker Cables)
1/4” Phono (6.35mm) (Standard Applications)
The standard XLR 3 contact pin outs are as shown above for a balanced lead. In such a configuration
audio “Hot” (pin 2) is the in-phase connection whilst audio “Cold” (pin 3) is the out-of-phase connection.
For an unbalanced lead however, you may connect pin 1 to either pin 2 or pin 3, but not both. In such a
configuration the remaining pin is used for the audio signal.
of the cable to avoid inducing “hum”. Pin 1 is a leading contact that engages at interconnection, before pin
2 or pin 3.
The PDN stands for Positive, Drain and Negative. P pin is used for the Positive (+) line and the N pin is
for the return line. D pin is a leading contact that engages at interconnection, before the major contacts. If
applicable, solder the cable screen to this contact.
When terminating the cable shielding to pin 1 it is suggested that the shield be only grounded at one end
MICROPHONE CABLE - BALANCED
INSTRUMENT / LINE CABLE (MONO)
- Amphenol Australia Pty Ltd Telephone [phone] Fax [phone]
MICROPHONE CABLE - UNBALANCED
INSTRUMENT / LINE CABLE (STEREO)
AC SERIES PANEL MOUNT CONNECTORS
THERMOPLASTIC TYPE
www.amphenolaudio.com
129