EP4CE55F23C8N Altera, EP4CE55F23C8N Datasheet - Page 176

• Manufacturer Part Number: EP4CE55F23C8N
• Description: IC CYCLONE IV FPGA 55K 484FBGA
• Manufacturer: Altera
• Series: CYCLONE® IV Er

Specifications of EP4CE55F23C8N

• Number Of Logic Elements/cells: 55856
• Number Of Labs/clbs: 3491
• Total Ram Bits: 2340000
• Number Of I /o: 324
• Voltage - Supply: 1.15 V ~ 1.25 V
• Mounting Type: Surface Mount
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 484-FBGA
• Family Name: Cyclone IV
• Number Of Logic Blocks/elements: 55856
• # I/os (max): 324
• Logic Cells: 55856
• Ram Bits: 2396160
• Operating Temp Range: 0C to 85C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 484
• Package Type: FBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Compliant

8–10
AS Configuration (Serial Configuration Devices)
Cyclone IV Device Handbook, Volume 1
f
1
For Cyclone IV E devices, the Quartus II software prohibits you from using the LVDS
I/O standard in I/O Bank 1 when the configuration device I/O voltage is not 2.5 V. If
you need to assign LVDS I/O standard in I/O Bank 1, navigate to
Assignments>Device>Settings>Device and Pin Option>Configuration to change
the Configuration Device I/O voltage to 2.5 V or Auto.
In the AS configuration scheme, Cyclone IV devices are configured with a serial
configuration device. These configuration devices are low-cost devices with
non-volatile memories that feature a simple four-pin interface and a small form factor.
These features make serial configuration devices the ideal low-cost configuration
solution.
For more information about serial configuration devices, refer to the
Configuration Devices (EPCS1, EPCS4, EPCS16, EPCS64, and EPCS128) Datasheet
volume 2 of the Configuration Handbook.
Serial configuration devices provide a serial interface to access the configuration data.
During device configuration, Cyclone IV devices read the configuration data through
the serial interface, decompress the data if necessary, and configure their SRAM cells.
This scheme is referred to as the AS configuration scheme because the device controls
the configuration interface.
Single-Device AS Configuration
The four-pin interface of serial configuration devices consists of the following pins:
■
■
■
■
This four-pin interface connects to Cyclone IV device pins, as shown in
Serial clock input (DCLK)
Serial data output (DATA)
Active-low chip select (nCS)
AS data input (ASDI)
Chapter 8: Configuration and Remote System Upgrades in Cyclone IV Devices
© December 2010 Altera Corporation
Serial
Figure
Configuration
8–2.
in