92250-588 FCI, 92250-588 Datasheet - Page 19
![no-image](/images/manufacturer_photos/0/2/253/fci_sml.jpg)
92250-588
Manufacturer Part Number
92250-588
Description
Telecom & Ethernet Connectors LOW PRO PCB 8 POS
Manufacturer
FCI
Datasheet
1.90512-005.pdf
(26 pages)
Specifications of 92250-588
Product
Telecom & Ethernet Connectors
Usoc Codes
RJ45
Number Of Ports
1
Shielding
Shielded
Current Rating
1 A
Voltage Rating
1000 V
Housing Material
Nylon
Color
Black
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
7.
TITLE
Copyright FCI
Form E-3334
Rev E
6.9.
MECHANICAL CHARACTERISTICS
7.1.
7.2.
Both forces measured with latch depressed or removed shall not exceed 35 Newtons.
Current Rating and Current Carrying Capacity
Mating and Unmating Forces.
a)
b)
c)
The Spring Form and Shield Tabs.
The spring contact ends shall be located in the individual slots.
Shield tabs intended for contact with PWB (bottom) or panel cut-out shall withstand 3 insertions in
the designated panel cut-out or manual depression. The spring form, measured as maximum
dimension from a shield shall not change its position by more than 0.254mm (0.010”).
Shield tabs intended for contact with shielded plug shall meet test conditions specified in
The temperature rise above ambient shall not exceed 30 degrees C at any point in the system
when all contacts connected in series are powered with 1A current
The following details shall apply:
Single and Multi-Port Jack Assemblies
Cross head speed 10mm/s (0.4 in/s) Max, 0.2mm/s (0.008 in/s) Min.
Lubrication is required on jacks and plugs
Only free floating fixtures are allowed for use
a)
b)
c)
paragraph titled ‘Durability’ of this specification.
TYPE
Ambient Conditions - still air at 25 degrees C
Reference - BUS-03-601
Connector derating curve shall be as shown in the following figure
Figure 5 – Current Carrying Capacity
PRODUCT SPECIFICATION
PDM: Rev:J
STATUS:
NUMBER
PAGE
AUTHORIZED BY
STATUS
J.R. VOLSTORF
Released
19 of 26
UNRESTRICTED
GS-12-083
Printed: Dec 09, 2008
REVISION
DATE
7-Jun-06
J
GS-01-001
.