20-101-1112 Rabbit Semiconductor, 20-101-1112 Datasheet - Page 55

• Manufacturer Part Number: 20-101-1112
• Description: MODULE RABBITCORE RCM4010
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-1112

• Module/board Type: MPU Core Module
• Product: Microcontroller Modules
• Core Processor: Rabbit 4000
• Clock Speed: 58.98 MHz
• Interface Type: Ethernet, Serial
• Flash: 512 KB
• Timers: 10 x 8 bit, 1 x 10 bit, 1 x 16 bit
• Operating Supply Voltage: 3 V to 3.6 V
• Board Size: 47 mm x 61 mm x 20 mm
• Core: RCM4010
• Processor Series: RCM4000
• Silicon Manufacturer: Rabbit
• Core Architecture: Rabbit 4000
• Silicon Core Number: RCM4010
• Silicon Family Name: RCM4000
• Kit Contents: Board
• Development Tool Type: Hardware / Software - Dev Kit (Dev Tool)
• Rohs Compliant: Yes
• For Use With/related Products: RCM4010
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: Q3413688

5.2.4 Prototyping Board Function Calls
The functions described in this section are for use with the Prototyping Board features.
The source code is in the Dynamic C
to modify it for your own board design.
The sample programs in the Dynamic C
the function calls.
Other generic functions applicable to all devices based on Rabbit microprocessors are
described in the Dynamic C Function Reference Manual.
5.2.4.1 Board Initialization
DESCRIPTION
RETURN VALUE
User’s Manual
void brdInit(void);
1. I/O port pins are configured for Prototyping Board operation.
2. Unused configurable I/O are set as tied outputs.
3. RS-232 is not enabled.
4. LEDs are off.
5. The slave port is disabled.
NOTE: The analog input function calls are supported only by the RCM4000 model since
Call this function at the beginning of your program. This function initializes Parallel
Ports A through E for use with the Prototyping Board, and on the RCM4000 model
loads the stored calibration constants for the A/D converter. This function call is intended
for demonstration purposes only, and can be modified for your applications.
Summary of Initialization
None.
the RCM4010 does not have an A/D converter.
LIB\RCM4xxx\RCM40xx.LIB
brdInit
SAMPLES\RCM4000
folder illustrate the use of
library if you need
49