101-0521 Rabbit Semiconductor, 101-0521 Datasheet - Page 20

• Manufacturer Part Number: 101-0521
• Description: MODULE RABBITCORE RCM3210
• Manufacturer: Rabbit Semiconductor

Specifications of 101-0521

• Module/board Type: MPU Core Module
• For Use With/related Products: RCM3210
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 101-521; 101-521

2.2.3 Step 3 — Connect Power
When all other connections have been made, you can connect power to the Prototyping
Board.
If you have the universal power supply, prepare the AC adapter for the country where it
will be used by selecting the plug. The RCM3200 Development Kit presently includes
Canada/Japan/U.S., Australia/N.Z., U.K., and European style plugs. Snap in the top of the
plug assembly into the slot at the top of the AC adapter as shown in Figure 4, then press
down on the spring-loaded clip below the plug assembly to allow the plug assembly to
click into place.
Connect the 3-pin connector from the AC adapter to header J9 on the Prototyping Board as
shown in Figure 4 below. A plug-type jack is available at J11 for other AC adapters.
Figure 4. Power Supply Connections
Plug in the AC adapter. The red power lamp on the Prototyping Board to the left of jack
J11 should light up. The RCM3200 and the Prototyping Board are now ready to be used.
NOTE: A RESET button is provided on the Prototyping Board to allow hardware reset
without disconnecting power.
To power down the Prototyping Board, unplug the power connector from J11. You should
disconnect power before making any circuit adjustments in the prototyping area, changing
any connections to the board, or removing the RCM3200 from the Prototyping Board.
14
RabbitCore RCM3200