101-0521 Rabbit Semiconductor, 101-0521 Datasheet - Page 40

• Manufacturer Part Number: 101-0521
• Description: MODULE RABBITCORE RCM3210
• Manufacturer: Rabbit Semiconductor

Specifications of 101-0521

• Module/board Type: MPU Core Module
• For Use With/related Products: RCM3210
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 101-521; 101-521

A program “runs” in either mode, but can only be downloaded and debugged when the
RCM3200 is in the Program Mode.
Refer to the
gramming port.
4.3.2 Standalone Operation of the RCM3200
The RCM3200 must be programmed via the Prototyping Board or via a similar arrange-
ment on a customer-supplied board. Once the RCM3200 has been programmed success-
fully, remove the serial programming cable from the programming connector and reset the
RCM3200. The RCM3200 may be reset by cycling the power off/on or by pressing the
RESET
from the Prototyping Board for end-use installation.
34
CAUTION: Disconnect power to the Prototyping Board or other boards when removing
button on the Prototyping Board. The RCM3200 module may now be removed
or installing your RCM3200 module to protect against inadvertent shorts across the
pins or damage to the RCM3200 if the pins are not plugged in correctly. Do not reapply
power until you have verified that the RCM3200 module is plugged in correctly.
Rabbit 3000 Microprocessor User’s Manual
for more information on the pro-
RabbitCore RCM3200