20-101-0497 Rabbit Semiconductor, 20-101-0497 Datasheet - Page 80

• Manufacturer Part Number: 20-101-0497
• Description: MODULE OP6810 W/O ETH/MEM EXPANS
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-0497

• Module/board Type: Single Board Computer Module
• Product: Prototyping Accessories
• Processor Type: Rabbit 2000
• Sram: 128 KB
• Flash: 256 KB
• Timers: 8 bit, 10 bit
• Number Of I/os: 24
• Operating Voltage: 9 V to 36 V
• Power Consumption: 1.5 W
• Board Size: 111 mm x 91 mm x 33 mm
• For Use With/related Products: OP6810
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 20-101-497; 20-101-497

D.4 LEDs (OP68xx.LIB)
When power is applied to the OP6800 for the first time, the red LED (DS1) will come on,
indicating that power is being applied to the OP6800. The red LED is turned off when the
brdInit
The LEDs are in series with the open-ouput collector that drives digital outputs OUT00–
OUT06, and so the same function call that turns on one of these digital outputs will also
turn on the corresponding LED.
PARAMETERS
RETURN VALUE
SEE ALSO
76
void ledOut(int led, int value);
LED on/off control.
A runtime error will occur if
value
led
value
None.
brdInit, digOut
NOTE: The LEDs and digital outputs OUT00–OUT06 are driven by the same driver
is the LED to control.
0 = LED DS1
1 = LED DS2
2 = LED DS3
3 = LED DS4
4 = LED DS5
5 = LED DS6
6 = LED DS7
0 = off
1 = on
chip. Do not use both ledOut and digOut to control the same LED or digital output
in a given application.
function executes.
is out of range.
is the value used to control whether the LED is on or off (0 or 1).
brdInit
was not executed before executing
ledOut
MiniCom (OP6800)
, or when
led
or