PIC10F222-I/MC Microchip Technology, PIC10F222-I/MC Datasheet - Page 14

• Manufacturer Part Number: PIC10F222-I/MC
• Description: IC PIC MCU FLASH 512X12 8DFN
• Manufacturer: Microchip Technology
• Series: PIC® 10Fr

Specifications of PIC10F222-I/MC

• Core Size: 8-Bit
• Program Memory Size: 768B (512 x 12)
• Core Processor: PIC
• Speed: 8MHz
• Peripherals: POR, WDT
• Number Of I /o: 3
• Program Memory Type: FLASH
• Ram Size: 23 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-DFN
• Controller Family/series: PIC10
• No. Of I/o's: 4
• Ram Memory Size: 23Byte
• Cpu Speed: 8MHz
• No. Of Timers: 1
• Digital Ic Case Style: DFN
• Processor Series: PIC10F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 23 B
• Interface Type: USB
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 4
• Number Of Timers: 1
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit, 2 Channel
• Package: 8DFN EP
• Device Core: PIC
• Family Name: PIC10
• Maximum Speed: 8 MHz
• Operating Supply Voltage: 2.5|3.3|5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164334 - MODULE SOCKET FOR 8L 2X3MM DFNAC163020-2 - ADAPTER PROGRAM PIC10F 2X3 DFNAC162070 - HEADER INTRFC MPLAB ICD2 8/14P
• Eeprom Size: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

PIC10F220/222
5.0
For the PIC10F220/222, once code protection is
enabled, all program memory locations 0x040-0x0FE
(PIC10F220) and 0x040-x1FE (PIC10F222) inclusive,
read all ‘0’s. Program memory locations 0x000-0x03F,
0x0FF (PIC10F220) and 0x1FF PIC10F222) are
always unprotected. The user ID locations, backup
OSCCAL locations and the Configuration Word read
out in an unprotected fashion. It is possible to program
the user ID locations, backup OSCCAL locations and
the Configuration Word after code-protect is enabled.
5.1
It is recommended that the following procedure be
performed before any other programming is attempted.
It is also possible to turn code protection off (CP = 1)
using this procedure. However, all data within the
program memory will be erased when this
procedure is executed, and thus, the security of the
code is not compromised.
To disable code-protect:
a)
b)
c)
5.2
DS41266C-page 14
Note:
Enter Program mode.
Execute
command (001001).
Wait T
CODE PROTECTION
Disabling Code Protection
Embedding Configuration Word
and User ID Information in the
Hex File
ERA
To allow portability of code, the program-
mer is required to read the Configuration
Word and user ID locations from the hex
file when loading the hex file. If Configura-
tion Word information was not present in
the hex file, then a simple warning
message may be issued. Similarly, while
saving a hex file, the Configuration Word
and user ID information must be included.
An option to not include this information
may be provided.
Microchip Technology Incorporated feels
strongly that this feature is important for
the benefit of the end customer.
.
Bulk
Erase
Program
Memory
5.3
5.3.1
Checksum is calculated by reading the contents of
the PIC10F220/222 memory locations and adding up
the opcodes up to the maximum user addressable
location (e.g., 0x1FF for the PIC10F222). Any Carry
bits exceeding 16 bits are neglected. Finally, the
Configuration Word (appropriately masked) is added
to the checksum. Checksum computation for the
PIC10F220/222 is shown in Table 5-2.
The checksum is calculated by summing the following:
• The contents of all program memory locations
• The Configuration Word, appropriately masked
• Masked user ID locations (when applicable)
The Least Significant 16 bits of this sum is the
checksum.
The following table describes how to calculate the
checksum for each device.
Note:
Checksum Computation
CHECKSUM
The checksum calculation differs depend-
ing on the code-protect setting. The
Configuration Word and user ID locations
can always be read regardless of the
code-protect settings.
© 2007 Microchip Technology Inc.