VQZ2121-5YZ1-N7T SMC Corporation, VQZ2121-5YZ1-N7T Datasheet - Page 75

• Manufacturer Part Number: VQZ2121-5YZ1-N7T
• Description: Solenoid Valve, 5 port, body ported, 2 position sngl, 24VDC, DIN, 1/4 port
• Manufacturer: SMC Corporation
• Type: Solenoidr

Specifications of VQZ2121-5YZ1-N7T

• Brand/series: VQZ Series
• Configuration: 2-Position Single
• Number Of Ports: 5
• Primary Type: Solenoid Valve
• Size, Port: 1⁄4"
• Voltage, Coil: 24 VDC
• Operating Pressure Range: 15-100 PSI (30-100 PSI For Three Position Valves)

1. Removing
2. Mounting
1. After confirming the gasket is correctly
1) Loosen the clamp screw on the
2) Lift the
1) Catch the hook of the DIN rail bracket on the
2) Push side
placed under the valve, securely tighten the
bolts with the proper torque shown in the ta-
ble below.
VQZ1000
VQZ2000
VQZ3000
manifold.
in the direction of the
DIN rail.
The proper tightening torque for screws is 0.3 to 0.4 N m.
Caution
Caution
Model
Clamp screw
Screw
Clamp bracket
DIN Rail Removal/Mounting
Proper tightening torque
side
0.18 to 0.25 N m
0.25 to 0.35 N m
onto the DIN rail and tighten the clamp screw.
0.5 to 0.7 N m
Series
Specific Product Precautions 5
Be sure to read this before handling.
For 5 Port Solenoid Valve and Common Precautions, refer to “Precautions for Handling
Pneumatic Devices” (M-03-E3A).
Valve Mounting
of the manifold off the DIN rail and slide it
side.
VQZ
side of both ends of the
side on the
1. Use within the allowable voltage range.
2. Do not use beyond the specified range.
3. Establish a backup system beforehand,
4. Provide an external emergency stop circuit
5. When using for an interlock circuit:
Using beyond the allowable voltage range is likely to cause
the units and connecting devices to be damaged or to mal-
function.
Using beyond the specified range is likely to cause a fire, mal-
function, or breakdown in the units and connecting devices.
Check the specifications before handling.
which employs fail-safe concepts such as
multiple equipment and devices to prevent
breakage or malfunction of this product.
that will immediately stop an operation and
cut off the power supply.
• Provide a double interlock which is operated by another sys-
• Perform an inspection to check that it is working properly be-
tem (such mechanical protection function).
cause it can cause possible injuries.
Warning
Serial Wiring EX510 Precautions
Design and Selection
Back page 6