R88A-CCW002C Omron, R88A-CCW002C Datasheet - Page 182

• Manufacturer Part Number: R88A-CCW002C
• Description: D-NET UNIT I/O CONNECTOR
• Manufacturer: Omron

Specifications of R88A-CCW002C

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: R88ACCW002C

Standard Models and Specifications
For Servomotors without Brakes
For Servomotors with Brakes
Note Connector-type terminal blocks are used for Servo Drivers of 1.5 kW or less, as shown in Terminal
2-6-3 Peripheral Cables and Connector Specifications
H Analog Monitor Cable (R88A-CMW001S)
This is cable for connecting to the Servo Driver’s Analog Monitor Connector (CN5). It is required for
connecting analog monitor outputs to external devices such as measuring instruments.
D Cable Models
D Connection Configuration and External Dimensions
2-152
R88A-CMW001S
Block Wiring Procedure under 3-2-3 Terminal Block Wiring. Remove the crimp terminals from the
phase-U, phase-V, and phase-W wires for these Servo Drivers. When using a 1.2-kW motor
(1,000 r/min), it cannot be connected to the R88D-WT15H connector as is. Wires with ferrules
must be thinned. Remove the crimp terminals from the phase-U, phase-V, and phase-W wires on
the Servo Driver side and thin the conductor to approximately half.
Servo Driver
M5 crimp
terminals
Servo Driver
M5 crimp
terminals
R88D-WTj
Model
Servo Driver
Red
White
Blue
Green/Yellow
Red
White
Blue
Green/Yellow
Black
Brown
Cable: AWG11 × 6C UL2586
Cable: AWG11 × 4C UL2586
1 m
Length (L)
Servomotor
Servomotor
Approx. 0.1 kg
Phase-U
Phase-V
Phase-W
Phase-U
Phase-V
Phase-W
Symbol
Symbol
Brake
Brake
FG
FG
Weight
Cable
Connector plug:
MS3106B22-22S (DDK Ltd.)
Cable clamp:
MS3057-12A (DDK Ltd.)
Servomotor
Receptacle:
MS3102A22-22P (DDK Ltd.)
Cable
Connector plug:
MS3106B24-10S (DDK Ltd.)
Cable clamp:
MS3057-16A (DDK Ltd.)
Servomotor
Receptacle:
MS3102A24-10P (DDK Ltd.)
External device
Chapter 2