XWT-ID08 Omron, XWT-ID08 Datasheet - Page 86
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
XWT-ID08
Manufacturer Part Number
XWT-ID08
Description
SMART SLAVE EXP 8 NPN IN
Manufacturer
Omron
Datasheet
1.XW4B-05C4-TF-D.pdf
(166 pages)
Specifications of XWT-ID08
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
XWTID08
- Current page: 86 of 166
- Download datasheet (4Mb)
Multi-drop Wiring
Methods
Wiring Methods
Note The OMRON XW4Z-00C and PHOENIX CONTACT SZF-1 screwdrivers are
Note We recommend using the following PHOENIX CONTACT terminal for this
suitable for tightening the DeviceNet connector’s set screws. Refer to 2-3
Cables, Connectors, and Related Devices for contact information to order the
PHOENIX CONTACT screwdriver.
The following diagram shows the dimensions of the XW4Z-00C screwdriver.
Multi-drop Connection with a Standard Connector (Thin Cables Only)
When thin cable is being used, a multi-drop connection can be made by
inserting each pair of wires into a single same pin terminal and crimping them
together.
type of multi-drop connection.
Multi-drop Connection with a Multi-drop Connector
The following OMRON Multi-drop Connectors (sold separately) can be used
to make a multi-drop connection with either thin or thick cable.
0.6 mm
Side
• PHOENIX CONTACT AI-TWIN Series
• XW4B-05C4-T-D Straight Multi-drop Connector without Attachment
When using thick cable, provide some slack in the cable so that the con-
nectors do not pull out because of tension on the cable.
Screws
AI TWIN2 × 0.5-8WH (for thin cable)
3.5 mm
Front
Slotted screwdriver that
does not taper at the tip
Model
CRIMPFOX UD6
Crimping Tool
Section 2-4
65