CC-9P-V526UJ-S Digi International, CC-9P-V526UJ-S Datasheet
CC-9P-V526UJ-S
Specifications of CC-9P-V526UJ-S
Related parts for CC-9P-V526UJ-S
CC-9P-V526UJ-S Summary of contents
Page 1
ConnectCore 9P 9215, Wi-9P 9215, and 3G 9P 9215 Hardware Reference 90000879_L Release date: October 2010 ™ ...
Page 2
... Digi may make improvements and/or changes in this manual or in the product(s) and/or the program(s) described in this manual at any time. This product could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes may be incorporated in new editions of the publication. ...
Page 3
... Please always check the product specific section on the Digi support website for the Documentation most current revision of this document: www.digiembedded.com/support/ updates For more information about your Digi products, or for customer service and Customer support technical support, contact Digi international. To contact Digi International by Mail World Wide Web email Telephone (U.S.) ...
Page 4
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 5
Multiplexed GPIO pins .................................................................32 GPIO multiplex table .........................................................................33 Module LEDs .............................................................................38 ConnectCore 9P 9215 LEDs ..................................................................38 ConnectCore Wi-9P 9215 LEDs ...............................................................................38 ConnectCore 3G 9P 9215 LEDs ..............................................................38 External interrupts ............................................................................38 Interfaces ................................................................................39 10/100 Mbps Ethernet port ..................................................................39 UART ............................................................................................39 ...
Page 6
Switches and Pushbuttons ............................................................ 49 Reset control, S3 ............................................................................. 49 Power switch, S2 ............................................................................. 49 User pushbuttons, S6 and S7 ................................................................ 50 Legend for multi-pin switches .............................................................. 50 Module configuration switches, S4 ........................................................ 50 Wake-up button, S8 .......................................................................... 50 Serial ...
Page 7
I2C digital I/O expansion .....................................................................62 SPI interface ............................................................................63 Pin allocation ..................................................................................64 Current Measurement Option ........................................................65 How the CMO works ..........................................................................65 JTAG Interface ..........................................................................66 Standard JTAG ARM connector, X13 ........................................................67 PoE module connectors - IEEE802.3af ..............................................68 The 802.3af PoE Application Kit ...
Page 8
X21 pinout ..................................................................................... 81 Appendix A:Specifications ................................................................. 82 Mechanical Information ............................................................... 82 Network Interface ..................................................................... 83 Ethernet ....................................................................................... 83 WLAN Interface ............................................................................... 83 WWAN Interface .............................................................................. 85 Environmental Information .......................................................... 87 Thermal Specifications ............................................................... 88 Additional design recommendations ...................................................... 90 ...
Page 9
... ConnectCore 3G 9P 9215 GPS Antenna GPS-X-02021 ........................... 115 Mechanical Data ............................................................................. 115 Electrical Specification .................................................................... 115 Environmental Specification .............................................................. 116 Appendix B:Certifications ................................................................117 FCC Part 15 Class B .................................................................. 117 Appendix C: ConnectCore 3G 9P 9215 Strapping ....................................122 Strapping Options .................................................................... 122 Appendix D: ConnectCore 3G 9P 9215 GPIO ..........................................124 GPIO .................................................................................... 125 ConnectCore 9P 9215, Wi-9P 9215, and 3G 9P 9215 Hardware Reference ...
Page 10
Appendix E: Change Log ................................................................. 127 Revison B ............................................................................... 127 Revision C .............................................................................. 127 Revision D .............................................................................. 127 Revision E .............................................................................. 128 Revision F .............................................................................. 128 Revision G ............................................................................. 128 Revision H .............................................................................. 128 Revision I ............................................................................... 128 Revision J ...
Page 11
... At the heart of the modules is a Digi 32-bit ARM9-based Digi NS9215 processor running at 150 MHz. Key features include 10/100 Mbit Ethernet, two on-chip Flexible Interface Modules (FIMs), 256-bit AES accelerator, power management modes with dynamic clock scaling, and a rich set of on-chip peripherals. Based on Digi 802 ...
Page 12
For further information about the Digi NS9215, see the Digi NS9215 Hardware Reference Manual ...
Page 13
... The ConnectCore 9P 9215 module is currently available in standard variants below. Module variant Product numbers: CC-9P-V502-C CC-9P-V501-C CC-9P-V526UH-S CC-9P-V526UJ-S ConnectCore 9P 9215, Wi-9P 9215, and 3G 9P 9215 Hardware Reference 13 Features 150 MHz CPU speed, 8MB SDRAM NOR flash, RTC, 10/100 Mbps Ethernet 150 MHz CPU speed, 8MB SDRAM, 2MB NOR flash, RTC, 10/100 Mbps ...
Page 14
...
Page 15
X1 pin number 19 O I/O 22 I/O 23 I/O 24 I/O 25 I/O 26 I/O 27 I/O 28 I/O 29 I/O 30 I/O 31 I/O 32 ...
Page 16
pin Type number ...
Page 17
X1 pin number I ConnectCore 9P 9215, Wi-9P 9215, and 3G 9P 9215 Hardware Reference 17 Type Module functionality Usage on Development Board ...
Page 18
pinout Type X2 pin number I/O 4 I/O 5 I/O 6 I/O 7 I/O 8 I/O 9 I/O www.digiembedded.com Module functionality Usage on Development Board GND ...
Page 19
Type X2 pin number 10 I/O 11 I/O 12 I/O 13 I/O 14 I/O 15 I/O ConnectCore 9P 9215, Wi-9P 9215, and 3G 9P 9215 Hardware Reference 19 Module functionality Usage on Development Board TXDA/ Timer8_In/ Timer7_Out/ GPIO7/ SPI_TX (dup) ...
Page 20
Type X2 pin number 16 I/O 17 I/O 18 I/O 19 I/O 20 I/O 21 I/O 22 I/O 23 I/O 24 I/O www.digiembedded.com Module functionality Usage on Development Board RTSC#/ QDCQ/ Ext ...
Page 21
Type X2 pin number 25 I/O 26 I/O 27 I/O 28 I/O 29 I/O 30 I/O 31 I/O 32 I/O 33 I/O 34 I/O ConnectCore 9P 9215, Wi-9P 9215, and 3G 9P 9215 Hardware Reference 21 Module functionality Usage on ...
Page 22
Type X2 pin number 35 I/O 36 I/O 37 I/O 38 I/O 39 I/O 40 I/O 41 I/O 42 I/O 43 I/O 44 I/O www.digiembedded.com Module functionality Usage on Development Board PIC_0_CLK[I] ...
Page 23
Type X2 pin number 45 I/O 46 I/O 47 I/O 48 I/O 49 I/O 50 I/O 51 I/O 52 I/O 53 I/O 54 I/O ConnectCore 9P 9215, Wi-9P 9215, and 3G 9P 9215 Hardware Reference 23 Module functionality Usage on ...
Page 24
Type X2 pin number 55 I/O 56 I/O 57 I/O 58 I/O 59 I/O 60 I/O 61 I/O 62 I/O 63 I/O 64 I/O www.digiembedded.com Module functionality Usage on Development Board PIC_0_BUS_0[7] ...
Page 25
Type X2 pin number 65 I Note1: For ConnectCore 3G ...
Page 26
... The user has access to six configuration signals: Default module CPU LITTLE#/BIG_ ENDIAN which allows the user to select the endianess of the ...
Page 27
— ...
Page 28
Signal name SW_CONF1 SW_CONF2 SW_CONF3 Note 1: www.digiembedded.com Function See note 1. See note 1. See note 1. For the ConnectCore 9P 9215 and ConnectCore Wi-9P 9215: This pin is a user/application ...
Page 29
...
Page 30
Reset Behavior SPI boot Strapping PLL Other strappings (Endianess) GPIO configuration Other (ASIC) registers SDRAM keeps its contents ...
Page 31
... CS0# 256 NOR-Flash 256 external, CS2# 256 internal, CS3# Comments First bank on module Program memory on module CC3G: internally used for USB controller Reserved for internal usage CC3G: NAND flash on module ...
Page 32
...
Page 33
GPIO [15:0] allow five multiplex modes. Pin notes GPIO [103:16] and GPIO_A [3:0] have four multiplex modes. Using a pin as GPIO means always to give up other functionalities. Some functions are duplicated to enhance the chance ...
Page 34
Port Alternate function Alternate function name Function 03 GPIO17 D1 CTSB# GPIO18 D2 DSRB# GPIO19 D3 RXDB GPIO20 D4 RIB# GPIO21 D5 RTSB# / 485CTLB GPIO22 D6 TXCLKB / DTRB# ...
Page 35
Port Alternate function Alternate function name Function 03 GPIO39 MII_RXD1 PIC_0_GEN_IO[7] GPIO40 MII_RXD2 PIC_1_GEN_IO[0] GPIO41 MII_RXD3 PIC_1_GEN_IO[1] GPIO42 MII_TXEN PIC_1_GEN_IO[2] GPIO43 MII_TXER PIC_1_GEN_IO[3] GPIO44 MII_TXD0 PIC_1_GEN_IO[4] GPIO45 MII_TXD1 PIC_1_GEN_IO[5] GPIO46 MII_TXD2 PIC_1_GEN_IO[6] GPIO47 MII_TXD3 PIC_1_GEN_IO[7] GPIO48 MII_COL Reserved ...
Page 36
Port Alternate function Alternate function name Function 03 GPIO68 PIC_0_GEN_IO[0] PIC_1_GEN_IO[0] GPIO69 PIC_0_GEN_IO[1] PIC_1_GEN_IO[1] GPIO70 PIC_0_GEN_IO[2] PIC_1_GEN_IO[2] GPIO71 PIC_0_GEN_IO[3] PIC_1_GEN_IO[3] GPIO72 PIC_0_GEN_IO[4] PIC_1_GEN_IO[4] GPIO73 PIC_0_GEN_IO[5] PIC_1_GEN_IO[5] GPIO74 PIC_0_GEN_IO[6] PIC_1_GEN_IO[6] GPIO75 ...
Page 37
Port Alternate function Alternate function name Function 03 GPIO97 PIC_0_BUS_1[1] PIC_1_BUS_1[1] GPIO98 PIC_0_BUS_1[2] PIC_1_BUS_1[2] GPIO99 PIC_0_BUS_1[3] PIC_1_BUS_1[3] GPIO100 PIC_0_BUS_1[4] PIC_1_BUS_1[4] GPIO101 PIC_0_BUS_1[5] PIC_1_BUS_1[5] GPIO102 PIC_0_BUS_1[6] PIC_1_BUS_1[6] GPIO103 PIC_0_BUS_1[7] PIC_1_BUS_1[7] GPIO_A0 A24 I2C_SCL dupe GPIO_A1 A25 I2C_SDA dupe GPIO_A2 ...
Page 38
... Connects to LE1 GPIO88 LE2 GPIO89 The ConnectCore 9P 9215 family of modules provide access to four external External interrupts signals, which are multiplexed with other functions on the GPIO pins. interrupts Every interrupt is multiplexed to two or three different GPIO pins. These duplicate signals are marked as (dup) in the GPIO table. ...
Page 39
... The PHY address on the MII bus is 0x7 (0b00111). The module does not only provide access to the Ethernet signals coming out of the PHY, but supports also two status LEDs: ETH_ACTIVITY# and ETH_LINK#. The ConnectCore 9P 9215 and ConnectCore Wi-9P 9215 modules provide up to four ...
Page 40
The module supports baud rates up to 1.8432 Mbps in asynchronous mode. Each UART has a 64-byte TX and RX FIFO available. The following interfaces are only available on the ConnectCore 9P ...
Page 41
... The antenna switch works by alternately connecting the antennas to either the transceiver PA transmit output or the transceiver receive input. To support this antenna sharing scheme, the module operates in half-duplex mode; receive and transmit operations do not occur at the same time. ConnectCore 9P 9215, Wi-9P 9215, and 3G 9P 9215 Hardware Reference 41 ...
Page 42
WLAN Antenna Switch The antenna switch is a digitally controlled 2.4 GHz, 50 ohm, multi-function solid state switch, controlled by software. The receive port can be switched between antenna 1 or antenna ...
Page 43
RF Connector RF Connector The connect Core 3G 9P 9215 Development board and module contains several RF connectors, as well as the two connectors located on the Gobi 2000 module (refer to the above diagrams.) Cellular RF Path: The cellular ...
Page 44
...
Page 45
... UART B MEI (RS232/RS4xx) with status LEDs on SUB-D 9-pin connector (X6 UART D RS232 with status LEDs, on SUB-D 9-pin connector (X3 UART C with TTL levels shared with HDLC signals on 10-pin header (X5 UART A with TTL levels shared with SPI signals on 10-pin header (X4 headers Including access to 16-bit data/10-bit address bus signals ...
Page 46
... Development Board + module, and module alone – 3.3V coincell battery with socket – PoE connectors for optional 802.3af PoE Application Kit (P/N DG-ACC-POE) Prototyping area ( holes) with +3.3V and GND connections – ConnectCore 3G 9P 9215 only: USB host connector ...
Page 47
ConnectCore 9P 9215 Development Board – ConnectCore 9P 9215, Wi-9P 9215, and 3G 9P 9215 Hardware Reference 47 ...
Page 48
...
Page 49
...
Page 50
Use the user pushbuttons to interact with the applications running on the User pushbuttons, ConnectCore 9P 9215, ConnectCore Wi-9P 9215 and ConnectCore 3G 9P 9215 S6 and S7 modules. Use these module ...
Page 51
... On = Termination on Off = No termination Comments Auto Power Down is not supported on this board. This signal is only accessible to permit the user to completely disabled the MEI interface for using the signals for other purposes. To disable the MEI interface RS232 mode (S1.1 = ON) and activate the Auto Power Down feature (S1 ...
Page 52
...
Page 53
Jumper functions Jumper Name If connection made J1 Enable transceiver This jumper allows to disable the console RS232 transceiver. J2 Battery enable Supplies the real time clock with 3V from the battery (lithium coin cell battery, G1) even if the ...
Page 54
...
Page 55
The user LEDs are controlled through applications running on the ConnectCore 9P User LEDs, LE5 9215 family of modules, if jumpers J5 and J4 are inserted. Use these module signals and LE6 to implement the LEDs: Signal name USER_LED1# USER_LED2# ...
Page 56
For more information please see the ConnectCore 9P 9215 schematics Note: document online ...
Page 57
The serial (UART) port D connector, X3 DSUB9 male connector Serial port D, the standard console RS232 cable to connect to a computer serial port. The serial port D interface corresponds to NS9215 UART port D. The line ...
Page 58
... The XBee socket consists of two separate connectors J8 and J9. The XBee pinning Serialport A, counts counter clock wise, so pin pin 20 of the module. All pins are XBee socket connected 1 pin row to enable the usage of unconnected pins. Pin Function Defaults to 1 VCC 2 RXDA/SPI_RXD/GPIO3 GPIO3 3 TXDA/SPI_TXD/GPIO7 GPIO7 4 NC ...
Page 59
... By default, Serial C signals are configured to their respective GPIO signals, except for GPIO12 the responsibility of the driver to configure them properly. ConnectCore 9P 9215, Wi-9P 9215, and 3G 9P 9215 Hardware Reference 59 HDLC interface. Comments CC3G: RXDC# internally used CC3G: TXCLKC internally used ...
Page 60
The serial (UART) port B connector, X6 DSUB9 male connector. This Serial port B, asynchronous serial port is DTE and requires a null-modem cable to connect to a MEI interface ...
Page 61
...
Page 62
The Development Board provides digital I/O additional digital I/Os. The I expansion an open drain The I/O expander allocated as shown: Pin Signal 1 IO_0 2 IO_1 3 ...
Page 63
... SPI Header, X8 The Development Board provides access to the SPI interface on the module using the SPI connector, X8. The SPI interface on the Development Board is shared with UART_A (NS9215 port A). Because the module’ ...
Page 64
SPI connector pins are allocated as shown: Pin allocation Pin Signal 1 +3.3V 2 TXDA/SPI_TXD/GPIO7 3 RXDA/SPI_RXD/GPIO3 4 RTSA#/SPI_CLK/GPIO5 5 DCDA#/SPI_EN#/GPIO0 6 GND www.digiembedded.com 64 ...
Page 65
...
Page 66
...
Page 67
The standard JTAG ARM connector is a 20-pin header and can be used to connect Standard JTAG development tools such as Digi’s JTAG Link, ARM’s Multi-ICE, Abatron BDI2000, and ARM connector, X13 others. Pin Signal 1 +3.3V 3 TRST# 5 ...
Page 68
... The Development Board has two PoE module connectors, X9 and X26. The PoE module is an optional accessory item that can be plugged on the Development Board through the two connectors: X9, input connector: Provides access to the ...
Page 69
... Plug in the 802.3af PoE Application Kit (P/N DG-ACC-POE right angle to the The 802.3af PoE Development Board, as shown in this drawing: Application Kit This is how the PoE input connector pins are allocated: X9 Pin This is how the PoE output connector pins are allocated: X26 ...
Page 70
... The Development Board provides access to POE_GND allowing turned off POE_GND when power is provided through Power Jack X26.4 and X26.5. The power jack is a barrel connector with 9-30VDC operating range. The power jack Power Jack, X24 is labeled X24 on the Development Board. This figure schematically represents the power jack’ ...
Page 71
...
Page 72
RJ-45 connector pins are configured as shown: RJ-45 pin allocation, X19 Pin Signal 802.3af End-Span (mode A) 1 TXD+ Negative V 2 TXD- Negative V 3 RXD+ Positive V Port 4 EPWR+ ...
Page 73
...
Page 74
...
Page 75
X30, U.FL connector with decoupled connection to X29 for secondary (AUX)/GPS antenna Primary antenna connection, Dual SIM socket ConnectCore 9P 9215, Wi-9P 9215, and 3G 9P 9215 Hardware Reference 75 X29, U.FL connector with 3.3V for active GPS antenna P1, ...
Page 76
... ConnectCore 9P 9215 Development Board The Development Board provides one, 2x25-pin, 0.10” (2.54mm) pitch header for supporting application-specific daughter cards/expansion boards: X33, Peripheral application header. Provides access to an 16-bit data bus, 10- bit address bus, and control signals (such as CE#, IRQ#, WE#), as well as I power (+3.3V). Using these signals, you can connect Digi-specific extension modules or your own daughter card to the module’ ...
Page 77
Peripheral application pins are allocated as shown in the table below: Peripheral application header, X33 Pin Signal 1 GND 3 BD1 5 BD3 7 BD4 9 BD6 11 GND 13 BD9 15 BD11 17 BD12 19 BD14 21 GND 23 ...
Page 78
...
Page 79
... BA11 B13 BA15 B14 EXT_WE# B15 BE3# B16 NC B17 NC B18 B19 B20 Signal X11 pin RSTIN# D1 TMS D2 RTCK D3 SW_CONF0 D4 WLAN_LED# (CC Wi-9P 9215) D5 BD2 D6 BD6 D7 BD10 D8 BD14 D9 Signal GND TCK TRST# WLAN_DISABLE# SW_CONF3 BD1 BD5 BD9 BD13 BA0 BA4 BA8 BA12 BA16 ...
Page 80
X11 pin C10 C11 C12 C13 C14 C15 C16 C17 C18 C19 C20 *USB and Etherent signals are not connected to this connector due to signal quality. X20 pinout X20 pin A1 ...
Page 81
X20 pin A19 A20 X21 pinout X21 pin C10 C11 C12 C13 C14 C15 C16 C17 C18 C19 C20 ConnectCore 9P 9215, Wi-9P 9215, and 3G 9P 9215 Hardware Reference 81 ...
Page 82
Appendix A:Specifications T his appendix provides environmental, mechanical, safety and power information for the ConnectCore 9P 9215, ConnectCore Wi-9P 9215, and ConnectCore 3G 9P 9215 modules ...
Page 83
... Data Rates Supported – 5. 11, 12, 18, 24, 36, 48, 54 Mbps Media Access Protocol – Carrier-Sense Multiple Access with Collision Avoidance (CSMA/CA) Wireless Medium – 802.11b/g: Direct Sequence-Spread Spectrum (DSSS) and Orthogonal Frequency Divisional Multiplexing (OFDM) 802.11a: OFDM – ...
Page 84
... Differential Quadrature Phase Shift Keying (DQPSK Mbps Complementary Code Keying (CCK) @ 5.5 and 11 Mbps OFDM BPSK @ 6 and 9 Mbps QPSK @ 12 and 18 Mbps 16-Quadrature Amplitude Modulation (QAM and 36 Mbps 64-QAM @ 48 and 54 Mbps 2.412 to 2.472 GHz (ETSI) 2.412 to 2.462 GHz (FCC) 5 ...
Page 85
... Note: During manufacturing, EVM values are verified up to -23 dBm rms for band A Available Transmit Power Settings (Typical ( Note: Maximum power setting will vary according to individual country regulations. Connector U.FL Note: Please use HIROSE U.FL-LP-N-2 extraction tool for removing a U.FL cable from the ConnectCore Wi-9P 9215 or ConnectCore 3G 9P 9215modules ...
Page 86
Technology GSM/GPRS/EDGE Simultaneous GPS diversity supported Note band class supported without Rx diversity blank = band class not supported Supported Data Rates: Gobi Operating Mode CDMA 1xRTT CDMA 1xEV-DO WCDMA HSDPA/HSUPA GSM GPRS EDGE ...
Page 87
...
Page 88
... ConnectCore Wi-9P 9215 ConnectCore 3G 9P 9215 The lower standard operating temperature range is specified without restrictions, except condensation must not occur. The upper operating temperature limit depends on the host PCB layout and surrounding environmental conditions. To simplify the customer's design process, a maximum component case temperature has been specified. ...
Page 89
A The maximum component case temperature must remain below the maximum, measured at the locations shown in the figure below. ConnectCore 9P 9215, Wi-9P 9215, and 3G 9P 9215 Hardware Reference 89 ConnectCore Wi-9P 9215 Module ...
Page 90
When attaching thermocouples, please the follow the guidelines below: Carefully remove any labels or other foreign material from the component. Ensure an adhesive with high thermal conductivity is used. Use as little adhesive as possible. Make sure the ...
Page 91
...
Page 92
... Input voltage (Vcc) Input current Input low voltage Input high voltage Output low voltage Output high voltage ConnectCore 3G 9P 9215 Parameter Input voltage (Vcc) Input current Input low voltage Input high voltage Output low voltage Output high voltage www.digiembedded.com Limits 3.3V±10% (3.00V to 3.60V) 660mA max 0 ...
Page 93
... The ConnectCore3G 9P 9215 provides access to a PCIe 3G module. The whole circuitry is located on the module ...
Page 94
...
Page 95
...
Page 96
... These measurements were taken with all NS9215 I/O clocks disabled except UART B, UART D, Ethernet MAC, I/O Hub, and the Memory Clock; the Ethernet connected to a 100Mb network and the WLAN interface associated with an access point, using a standard module plugged into a JumpStart Kit board, with nominal voltage applied ...
Page 97
...
Page 98
Extended Footprint Option Device ConnectCore 9P 9215 module ConnectCore 9P 9215 JumpStart board (mating connector on the base board) www.digiembedded.com Berg/FCI connector 61082-081409LF 61083-084409LF 98 ...
Page 99
...
Page 100
...
Page 101
A Extended Footprint Option Device ConnectCore 9P 9215 module ConnectCore 9P 9215 JumpStart board (mating connector on the base board) Device ConnectCore 9P 9215 - Wi-9P 9215 module ConnectCore Wi-9P 9215 JumpStart board (mating ConnectCore 9P 9215 - Wi-9P 9215 ...
Page 102
ConnectCore Wi-9P 9215 Below are the mechanical dimensions of the ConnectCore Wi- 9P 9215 module. TOP View. BOTTOM View www.digiembedded.com 102 ...
Page 103
A SIDE view Device ConnectCore Wi-9P 9215 ConnectCore Wi-9P 9215 Development board (mating ConnectCore 9P 9215 - Wi-9P 9215 JumpStart board) ConnectCore 9P 9215, Wi-9P 9215, and 3G 9P 9215 Hardware Reference 103 Berg/FCI connector 61082-081409LF 61083-084409LF ...
Page 104
ConnectCore 3G 9P 9215 Below are the mechanical dimensions of the ConnectCore 3G 9P 9215 module. TOP View BOTTOM View www.digiembedded.com 104 ...
Page 105
A SIDE view Device ConnectCore 3G 9P 9215 ConnectCore 3G 9P 9215 Development board (mating ConnectCore 9P 9215 - Wi-9P 9215 JumpStart board) ConnectCore 9P 9215, Wi-9P 9215, and 3G 9P 9215 Hardware Reference 105 Berg/FCI connector 61082-081409LF 61083-084409LF ...
Page 106
...
Page 107
...
Page 108
This diagram shows the strength of the signal received by the whip antenna on both Antenna strength a horizontal and vertical plane. The diagram shows the magnetic field when the (radiation pattern) diagram antenna vertical position. The ...
Page 109
...
Page 110
Radiation pattern: H-Plane (2.0 and 5.0 GHz) Color Yellow Red Blue Purple Green Light brown Orange Aqua www.digiembedded.com Freq (MHz) Peak (dBi) Angle (o) 2400.0 3.39 257.68 2450.00 3.17 214.74 2500.00 2.79 288.0 5150.00 2.25 280.42 5200.00 5.23 252.63 5250.00 ...
Page 111
A Radiation pattern: E-plane (2.0 and 5.0 GHz) Color Yellow Red Blue Purple Green Light brown Orange Aqua ConnectCore 9P 9215, Wi-9P 9215, and 3G 9P 9215 Hardware Reference 111 Freq (MHz) Peak (dBi) Angle (o) 2400.0 2.60 283.22 2450.00 ...
Page 112
...
Page 113
A E-Plane Radiation Pattern Straight H-Plane Radiation Pattern Straight ConnectCore 9P 9215, Wi-9P 9215, and 3G 9P 9215 Hardware Reference 113 ...
Page 114
E-Plane Radiation Pattern 90° Bend H-Plane Radiation Pattern 90° Bend www.digiembedded.com 114 ...
Page 115
...
Page 116
Environmental Specification Parameter Operating Temperature Storage Temperature Vibration Humidity www.digiembedded.com Specification -40° +85° C -40° +85° C Sine sweep, 1G (0-P), 10-150-10Hz each axis 95% ~ 100% RH 116 ...
Page 117
... The ConnectCore 9P 9215, ConnectCore Wi-9P 9215, and ConnectCore 3G 9P 9215 modules have been tested and found to comply with the limits for Class B digital devices pursuant to Part 15 Subpart B, of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential environment ...
Page 118
... If the FCC ID is not visible when installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module FCC ID. THis exterior label can use wording such as the following: “ ...
Page 119
... MHz must be disabled to comply with US and Canadian regulatory requirements. The OEM users are encouraged to inform end users of this restriction as well. Declaration of Conformity (In accordance with FCC Dockets 96-208 and 95-19) Manufacturer’s Name: Corporate Headquarters: Manufacturing Headquarters: ...
Page 120
... Personal computers and peripherals The product listed above has been tested at an External Test Laboratory certified per FCC rules and has been found to meet the FCC, Part 15, Class B, Emission Limits. Documentation is on file and available from the Digi International Homologation Department. ...
Page 121
... The ConnectCore 9P 9215, ConnectCore Wi-9P 9215, and ConnectCore 3G 9P 9215 meet the following standards: Standards Emissions Immunity Safety ConnectCore 9P 9215, Wi-9P 9215, and 3G 9P 9215 Hardware Reference 121 Compliance dependent on platform characteristics ConnectCore 9P 9215 FCC Part 15 Subpart B ICES-003 EN 55022 EN 55024 UL 60950-1 CSA C22.2, No. 60950-1 EN60950-1 ...
Page 122
Appendix C: ConnectCore 3G 9P 9215 Strapping T his Appendix discusses strapping options for the ConnectCore 3G 9P 9215 module. Digi Plug-and-Play firmware based products allow for customization of the software to allow for different baseboard designs. Strapping options allow ...
Page 123
... C The serial ports on the developement board are labeled D, B and A. They are enabled according to the S4 Configuration Switch settings: Number of Serial Ports Enabled ConnectCore 9P 9215, Wi-9P 9215, and 3G 9P 9215 Hardware Reference 123 Port(s) Enabled on the Development Board B B and and A ...
Page 124
... GPIO available when configured for zero serial ports. The third column for one port, and so on. Some pins have dual purpose, such as GPIO68, which could also be used for EXT_SIM_VCC the external SIM function is being used, GPIO68 is not available. A description of the Python API can be found here: http://www.digi.com/wiki/developer/index.php/Digihw Note: www ...
Page 125
...
Page 126
... GPIO101 GPIO101 Comments For the external SIM variant, this signal is not available. Instead it is used as EXT_SIM_VCC For the external SIM variant, this signal is not available. Instead it is used as EXT_SIM_DATA For the external SIM variant, this signal is not available. Instead it is used as EXT_SIM_CLK For the external SIM variant, this signal is not available ...
Page 127
... Made additions necessary to accomodate additional device, CCWi-9P 9215. ...
Page 128
... On page 92, corrected FCC ID number. ...
Page 129
Revised the Configuration Pins section text of Chapter 1. 2 Revised the User Interface section of Chapter 2. 3 Added text describing the WWAN Interface section of Chapter 2. 4 Renamed the Typical Power Save Current /Power Measurements section 5 ...
Page 130
...