CC-9P-V526UJ-S Digi International, CC-9P-V526UJ-S Datasheet - Page 43

• Manufacturer Part Number: CC-9P-V526UJ-S
• Description: MOD 9P 32MB SDRAM 8MB FLASH
• Manufacturer: Digi International
• Series: -r

Specifications of CC-9P-V526UJ-S

• Module/board Type: Core Module
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: Networking

Gobi 2000 Module
Main
RF Connector
Aux
RF Connector
The connect Core 3G 9P 9215 Development board and module contains several RF
connectors, as well as the two connectors located on the Gobi 2000 module (refer
to the above diagrams.)
Cellular RF Path: The cellular RF path is established when the Gobi 2000 module
MAIN connector is cabled to the Development board X30 connector, along with a
cellular antenna connected to the Cellular Primary connector J6. Alternatively, the
Gobi 2000 MAIN connector could be cabled directly to the back of the module's J2
connector, with a cellular antenna connected to J2. (Note the latter is how the
module is certified and any deviation from this configuration will require re-
certification.)
GPS RF Path: The GPS RF path has two possible configurations, based on the GPS
antenna: Active and Passive.
When using an active GPS antenna, the Gobi 2000 module AUX connector is cabled
to the module X30 connector, and the module X29 connector is cabled to the
Development board Cellular Secondary connector X31. When an Active GPS antenna
is connected to development board at J7, GPS traffic is then available to the
module.
Alternatively, the Gobi 2000 AUX connector could be cabled directly to the
Development board Cellular Secondary connector X31, with a passive GPS antenna
connected at J7.
ConnectCore 9P 9215, Wi-9P 9215, and 3G 9P 9215 Hardware Reference
43