R88M-WP1K530H Omron, R88M-WP1K530H Datasheet - Page 384

• Manufacturer Part Number: R88M-WP1K530H
• Description: SERVO MOTOR 1.5KW 200V
• Manufacturer: Omron

Specifications of R88M-WP1K530H

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: R88MWP1K530H

Operation
Note If adjusting the Servomotor current detection offset, first try performing automatic adjustment
Flowchart for Servomotor Current Detection Offset Manual Adjustment
Note 1. Adjust the offset while monitoring the torque command monitor (current monitor)’s waveform.
4-146
System Check Mode
Servomotor current
detection offset manual
adjustment
(Fn00E). Only attempt manual adjustment if the torque ripple is still large after performing auto-
matic adjustment.
Adjust phase-U offset 10° in the best direction for torque ripple
Adjust phase-U offset 1° in the best direction for torque ripple.
Adjust phase-V offset 10° in the best direction for torque ripple.
Adjust phase-V offset 1° in the best direction for torque ripple.
Torque ripple does not improve even if adjusted in both + and – directions?
Rotate Servomotor at approx. 100 r/min. (with no load).
1 s min.
1 s min.
Characteristics OK?
End
U-phase (CU1)
offset adjustment
Phase selection (Cu1
= U phase)
1 s max.
1 s min.
1 s min.
V-phase (CU2)
offset adjustment
Phase selection (Cu2
= V phase)
Chapter 4
1 s max.