ZMOTIONS200ZCOG Zilog, ZMOTIONS200ZCOG Datasheet - Page 24

• Manufacturer Part Number: ZMOTIONS200ZCOG
• Description: KIT DEV ZMOTION MODULE
• Manufacturer: Zilog
• Series: ZMOTION™r

Specifications of ZMOTIONS200ZCOG

• Sensor Type: Motion, PIR (Pyroelectric Infrared)
• Sensing Range: -
• Interface: USB/Serial
• Sensitivity: -
• Voltage - Supply: -
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: ZMOT1AHH
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 269-4823

UM023301-0411
4. Make sure that the ZMOTION Development Board is powered OFF,
5. Apply power to the Development Board by plugging in the USB cable
6. An information notice may appear, indicating that the silicon is not the
Figure 7. The Location of the Rest and Go Icons
then connect the USB Smart Cable (Debugger) to P2, as described
above.
and setting SW1 to the ON position. Next, click the
ZDS II. Figure 7 indicates the location of both the
in the ZDS II menu bar.
latest version. This occurrence is normal and is not an issue. Click
to continue. You should see a message in the Debug Output Window
indicating that the load was successful, as shown in Figure 8.
The Reset icon
ZMOTION
ZMOTION Intrusion Detection Development Board
™
Intrusion Detection Development Kit
The Go icon
Reset
Reset
User Manual
and
icon in
Go
icons
OK
20