SP5004EGP Xeltek, SP5004EGP Datasheet - Page 64
SP5004EGP
Manufacturer Part Number
SP5004EGP
Description
SUPERPRO 5004EGP PROGRAMMER
Manufacturer
Xeltek
Series
SuperPro®r
Type
Gang-Universal Programmerr
Specifications of SP5004EGP
Contents
Programmer, AC Adapter, Cable, CD
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
For Use With/related Products
EEPROM, EPROM, FLASH, MCU, NVRAM, PLD
Other names
415-1051
2. Based on the byte (8‐bit), divide the file into four parts by address of the first
3. Based on the word (16‐bit), divide the file into two parts by address of the first
Program Two or More Files to One Chip
You can load several files into the buffer and write them to the chip. The following
explanation gives an example of programming three files (Sample1, Sample2, and
Sample3) to one chip. The example assumes the following:
• Write the data from the address 200 (Hex) of the file Sample1 to the address 0
• Write the data from the address 0 (Hex) of the file Sample2 to the address 3000
• Write the data from the address 4000 (Hex) of the file Sample3 to the address
1. Select Edit from the Buffer menu. Make sure that the Buffer clear on data load
2. Select Load from the File menu to load the Sample1 file.
Superpro
Program the two parts into two chips respectively.
When loading the file, select Even as the File Mode to write the data in the
addresses 0,2,4,6, etc. to one chip. Select Odd as the File mode to write the data
at the address 1,3,5,7, etc. to the other chip.
byte, the second byte, the third byte and the fourth byte out of every four bytes.
Program the four parts to four chips respectively.
When loading the file, select the 1
in the addresses 0, 4, 8, 12 (or C if HEX), etc. to one chip. Then select 2
4, 3
three chips.
two bytes and the last two bytes out of every four bytes. Program the two parts
to two chips respectively.
When loading the file, select the 1
data in the addresses 0, 1, 5, 6, etc. to one chip. Then select 2
write the remaining data to the other chip.
of the chip.
(Hex) of the chip.
4000 (Hex) of the chip.
option is not checked.
• In the Buffer Address field, enter 0.
• In the File Address field, enter 200.
rd
byte of 4, and finally 4
®
5004GP User’s Guide
th
byte of 4 to write the remaining data to the other
st
st
byte of 4 as the File Mode to write the data
2_type of 4 as the File Mode to write the
nd
_byte of 4 to
nd
byte of
64