MT9234ZPX-UPCI-CP Multi-Tech Systems, MT9234ZPX-UPCI-CP Datasheet - Page 47

• Manufacturer Part Number: MT9234ZPX-UPCI-CP
• Description: MODEM V.92 DATA/FAX/VOICE WORLD
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® ZPXr

Specifications of MT9234ZPX-UPCI-CP

• Data Format: V.92
• Baud Rates: -
• Interface: Parallel
• Voltage - Supply: 3.3V, 5V
• Mounting Type: Socket
• Package / Case: 6.0" L x 4.8" W x 0.7" H (152mm x 122mm x 18mm)
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

+VTX
Description:
Syntax:
Result Codes:
+VGR
Description:
Syntax:
Values:
Result Codes:
Reports:
+VGT
Description:
Syntax:
Values:
Result Codes:
Reports:
Multi-Tech Systems, Inc. AT Commands for the MultiModem & SocketModem MT9234 Series (S000434H)
Start Voice Transmission Process
Starts the voice transmission process. The PC sends the data in the format of the
previously entered +VSM command, using the flow control method selected by the
+FLO command. The voice data is buffered to withstand gaps of missing data from
the PC. If the modem does not have any current voice data, the modem sends
silence over to the analog destination until the PC provides more voice data. The
modem returns the OK result code and returns to Command mode after the modem
has completely transmitted its buffer contents. The Inactivity Timer can be used to
terminate the transmit data state, after which the modem returns to Command mode.
AT+VTS
OK on completion of transmission.
CONNECT if the modem accepts the command.
ERROR if the modem is not connected to at least one off-hook Telco line or one non-
Telco device.
Voice Gain for Received Voice Samples
Sets the gain for the received voice samples. Receive gain values larger than 128
indicate a larger gain than nominal, and values smaller than 128 indicate a gain
smaller than nominal. The modem may limit the receive gain to a narrower range,
such as from 120 to 136, or from 120 to 128. The value 0 is reserved for modem
automatic gain control (AGC).
+VGR=<gain>
0-255
OK if <gain>=0
ERROR if <gain> is not 0 or if not in voice mode.
+VGR?
+VGR=?
Set the Volume for Transmitted Voice Samples
Sets the volume control, either by attenuating or amplifying the signal for the
transmitted voice samples.
Note:
+VGT=<level>
0-255 Selects volume for transmitted voice samples. Default is 128
Values larger than 128 indicate a larger gain than nominal, and values smaller than
128 indicate a gain smaller than nominal. The modem may limit the receive gain to a
narrower range, such as from 120 to 136, or from 120 to 128. The value 0 is reserved
for modem automatic volume control (AVC).
OK if the modem accepts the command
ERROR if the parameter is out of range.
+VGT?
+VGT=?
The modem will limit the transmit level over the Telco lines, regardless of the
current +VGT setting, to that permitted by CFR FCC Rules Part 68 –
Subpart D.
Selects automatic gain control. Default is 128
Displays current or selected values.
Displays list of valid values supported.
Displays current or selected values.
Displays list of valid values supported.
Chapter 4 – Voice Commands
47